How to reduce the use of forklift trucks
Forklift maintenance and maintenance work is very important, this is not only to allow the forklift to maintain a relatively good working condition, but also to protect the safety of the job and the life of the vehicle. Because in some distribution center warehouses with relatively high logistics efficiency, the shipments are relatively high, so in order to be able to minimize the cost of logistics and transportation, the forklifts require 24 hours of continuous work. Under the operating conditions, how can the simple maintenance of the forklift be required to improve the efficiency of the work? 1. Forklifts are generally transported in the workshop and warehouse. In such a working environment, there will be some trash, wooden pallets, rags, production waste, and other impurities. Whether these impurities are stuck on the forklift's tire platform or anywhere on the wheel, it will have a great impact on the transport efficiency. Therefore, under such conditions of use, it is necessary to examine the emergence of such situations and eliminate these impurities. 2, forklifts also need to live in a timely manner lubricating oil and hydraulic oil, and for the mechanical part also requires careful maintenance. If the quantity of hydraulic oil is not enough, it will cause the forklift to fail to complete the specified rated load and height, and then it will greatly reduce the working efficiency. 3, the operation of forklift trucks need to be in accordance with the manual of the forklift to do the correct mode of operation, can not be free to operate and misoperation, the wrong way of operation is not only to damage the life of the forklift, serious accidents will also occur. 4. Forklift operators are indispensable for the training of relevant knowledge and skills. They can timely communicate safety operations to them. Not only can they reduce the damage caused by goods and vehicles during operation, but they can also Speaking of the failure probability of forklift failure, better protection of work efficiency. corn wet milling process, after germ gluten, starch are separated, the fiber is separated out, dosed with some corn slurry, then dried through revolving barrel contacting methed.It contains starch, cellulose and other oligossachride, meanwhile it have rich dissolvable protein and its degradable substance, such as peptide hormone, various amino acid and so on. Besides, it contains lactic acid, phytin salt, dissolving sugar, all these constitute a nutritional products.
It is good feed for phytophage livestock (cattle, sheep, and fish), also good for pig, chicken and other single stomach animals. 3-5% dosage in feed could provide the nutrition factors the animal need, but also promote the health of digesting system.
Corn Gluten Feed,Corn Gluten Feed For Pig Feed,Cgf 18 For Pig Feed,Con Gluten Feed 18 MIDI FEED BIOTECH LIMITED , https://www.midifeed.com