Marine electrical equipment knowledge

The increase of the source voltage is connected to the step-down diode, and when the voltage is lowered, it is bypassed to achieve load regulation.
What is the common maintenance management method for electrical equipment?
The power supply composed of the charger and the storage battery, and the DC power supply system composed of the power supply to the load, that is, the "charge and discharge board" is an essential equipment for the ship.
Touch: the temperature and vibration frequency of the uncharged part of the electrical equipment (with the back of the hand);
Test: various operating parameters and resistance values ​​of electrical equipment;
Do: Regular and irregular inspection and maintenance of electrical equipment.
Look: the appearance of the components of the electrical equipment and related monitoring indicators;
Listen: changes in the sound of electrical equipment when running (can be used to listen to the stick);
Smell: the smell emitted by electrical equipment (such as the burnt smell of various materials);
How to maintain the electrical equipment on board during the factory repair?
(1) Pay attention to the waterproof and moisture proof of electrical equipment and motors;
(2) It is forbidden for workers to arbitrarily connect power sources and wires;
(3) Carefully inspect and accept the repair project of the factory;
(4) The anti-sea biological anode protection system should be turned off when docking. Zui is good to open 24 hours after docking to prevent damage to the paint layer that has not been firmly damaged by the action of electricity ions. (In addition, the current value should be adjusted according to different navigation waters)
What is the attention of the deck to the electrical equipment of the bow when the ship is sailing in the storm? The charger works differently or the battery state is different, and the power supply voltage is often much higher than the rated voltage required by the load.
A: During the voyage of the wind and waves, Zui is good off the power supply of the motor such as the decker and the anchoring machine from the main switchboard of the engine room control room to prevent the electric appliance in the control box from being burned out once the water enters. Before the power is transmitted again, it must be confirmed that the circuit system is insulated normally;
B: After the voyage of the wind and waves, even if the ship does not have water, it is necessary to check the motor and its electrical insulation before sending power to prevent the motor and other electrical equipment from burning out. In the winter, pay special attention to the drying and moisture protection of the motor and its related electrical appliances.
4. Talk about the regular inspection and maintenance of the electric control system of the deck electric hydraulic lifting machine.
The main inspection and maintenance contents of the gramling: the wiring of the control box, the condition of the electromagnetic contactor, the relay contact and the flexible state of the armature mechanism, whether the status and function of each switch and the interlocking function of each relay are normal; some control boxes and motors It is equipped with a moisture-proof electric heater. Check whether the work is normal. If the motor is insulated or bearing, if it is an oil-cooled immersion motor, it must be absolutely guaranteed that the hydraulic oil has no impurities and no water ("McKia"); Some of the travel switch connected with the joystick are fixed in position and wiring; whether the status and position function of each solenoid valve, pressure switch, temperature switch, liquid level switch, limit switch used for control or protection are normal; The condition of the carbon brush slip ring assembly, the surface of the slip ring, the length of the carbon brush, the spring condition, the fastening of the wiring insulator, and the watertight condition of the component box; and the watertightness and insulation of the deck power cable box, the bottom of the box should be opened periodically. Drain the screw to check whether there is any water inside, check the cable protection tube for cracks, the expansion joint is good, pay attention to keep the power Dry and clean the interior of the splice box. The 24V acid battery zui high charging voltage is generally up to 28.2V, or higher. Alkaline batteries can be as high as 31V or even 36V. It is not appropriate to supply 24V ship load.
5. When changing the deck crane arm or hook wire, it is often necessary to adjust the position of the limit switch. How should the simple method of Zui be operated? In order to meet the load power requirements, it is more economical to install a VR1 DC buck regulator between the power supply and the load.
The simple method of zui is to release (or detach) the conveyor chain or transmission wire connected to the limit switch box after the boom or hook head is placed in a certain position, so that it does not follow the wire drum, etc. After the wire is good, it can be reset.

White Kraft Paper Bag

1.Material:White kraft paper bag is made out of 100% natural virgin wood pulp or recycled paper,which has no pungent odor. The raw materials which are selected carefully and imported from USA will be dealt with special process.The imported original wood pulp with 450 ° c high temperature sterilization is not easy to break and tear up.All the paper we used to manufacture the paper bag is not only super durable and reinforcement but also ECO friendly ,biodegradable,compostable environmental-friendly,natural friendly and PLA recyclable Owing to this good quality materials.We have very high standards on controlling raw materials.So that the supporting weight of our paper bag holds up to higher than those at the market. Reuse the paper bags as many times as you like and recycle them when you are done for a greener Earth! We offer a wide variety of material and color option to meet your requirements.

2.Size:Multi customized sizes are available,we accept personalized sizes.Different sizes including small,medium and large measurement which are suitable for different usages.It`s versatile.we category for kinds of industrial usage.

3.Handles:One reasons of this type of paper bag of excellent quality is for seeking a more luxurious handle solution all the paper bags handles are produced by fully automatic machines. Sturdy round twisted handles of paper bags which are made of 100% cellulose and fiber .They do not come out with an ease even you pull them with hard force.These handles are adhered with good quality super glue by fully automatic machines instead of handmade.which looks more elegant,clear,beautiful,sanitary,flat,reinforcement than handmade.So that it creats a smooth,elegant finish for the bags.No stray glue any where like other paper bags do.it's more convenient and make purchase easy to carry,take away,to go etc.

4.Bottom:Reinforcement flat square rectangle bottom is easily to stang up alone for easy packing.Reinforcement bottom is also neat and flat without glue outside.We deal with the bottom carefully in order not to break easily.You don't need to worry about stuff fall down from the paper bag and make a trouble mess.A good quality bottom will be more useful and helpful which is also made by fully automatic machines.It is not only solid but also strong enough to support heavy duty weight.It can take whatever the light or heavy stuff inside the paper bag.They are not only durable and convenient but also environmental friendly compostable and recyclable.

5.Printing:We have the best advanced technology fully automatic printing machines which can support up to 8 colours printing.We accept customer designs and logos.Gravure printing,embossing printing,debossing printing,hot stamping,screen printing,UV printing,offset printing,flexo printing with CMYK pantone non-toxic water based ink are all available. Our printing has a pretty good quality as the printing of the designs is not only more durable,sun proof,weather proof but also beautiful and bright,which absorbs ink well and is stable not easy to tide the color.We aslo supply plainpaper bag, which are perfect for craft and DIY. Printed and embellished as you may wish. Personalize the bags to make them uniquely yours. Print your own business logo and use them as retail carry bags.

6.Surface handling:we supply glossy and matte surface dealing.This all depends on customer`s requirements.Whatever the glossy or matte surface makes the bag more luxurous.

7.Appication: Great for packing clothes,shoes,foods,goodie bags, favor bags, shopping bags, Christmas kraft bags, merchandise bags. They are great and stunning as wedding favour bags that you can proudly present to your guests! which makes it very affordable for small to medium businesses, parties & events, wedding reception and start-up business.

8.Quatity inspection systerm : One of the reasons for our good Quality is that inspection system is best of its kind. We're proud of our quality control system. Our standards are very high. we put great stress on quality of products.Almost every process is computerized.. All products have to pass strict inspection before they go out. I believe the quality is soul of an enterprise. So we won't sacrifice the quality for quick profit.All of our products are suitable for the world market. Our products has always come up to international standards. We have trained analysts to do quality analysis of each process when we make the product.We also provide quality analysis training as part of training for new workers plus a week of futher training every year. So our products are well known for their fine quality. All the paper bag are received a warm welcome in the world market wherever they go.Our clients are all satisfied with them.

9.Sample:We offer free samples between three and five days, but excluding complicate condition upon customer`s requirnments.For instance, we charge you like 50 dollars for samples,but we will refund you after placing an order.The expenses of samples delivery can be nagotiated.

10.Our factory: Jinan Xin Shun Yuan Packing Co., Ltd is located in Ningjiabu Industrial Park,Zhangqiu district, Jinan city, Shandong province, China.It originated in Shandong Printing Factory (founded in 1994).It is professional manufacture of new environmental-friendly packing bag based printing processing enterprise with more than 12 years of experience in production and management.Recent years, our scale is expanding. Covering an area of about 2 million square meters. And also expand our equipment, like unit type flexo printing machines, satellite adagio printing machines, lamination type flexo printing machines, gravureprinting , dry laminating machines, automatic square bottom paper bag machines, food paper bag machines, automatic control stick bag machines, trilateral, edges the closure, self-reliance paper bag machines, CNC cutting machines.We have 8 sets flexo printing machines, 1 set Gravure printing machine;12 sets Paper bag machines ; 5 sets cutting machines, tin tie machines;30 sets heat sealing machines ; 3 sets glue coating machines , etc. We have150 staff menbers,18 management staff ,12 salesmen and 120 workers. We have ISO9001, FSC certificates.

11.Packing & Shipment:Standard export packing, 250PCS or 500PCS each carton. We try our best to make sure the packing is seaworth and strong enough to stand the rough handling in a long distance shipment .In order to ensure the packing is moisture resistance,water proof,weather proof etc.The packing corrugated cartons therefore are lined with plastic bag from inside and strengthened double solid plastic straps.We have rich experience on packing.We normally do not only provide air transportment and sea transportment but also multi modal combined transportments,which is up to customer`s requirements.

12.Payment methord: L/C,D/A,D/P,T/T,Western Union,MoneyGram Paypal payments.

13.Our service:we are in 24/7 service,we are responsibilable for replacing the defect products.Feel free to talk to us.


White Paper Bag,Brown Kraft Paper Bags,Small Kraft Paper Bags,Kraft Paper Gift Bags

JINAN XINSHUNYUAN PACKING CO., LTD , https://www.xsy-packaging.com