Model NO.: TMF Series
Measuring Media: Liquid
Measuring Principle: Coriolis Force
Measurement Object: Closed Pipeline
Certification: CE, RoHS
Measurement Scope: 2kg/H~500t/H
Medium Temperature: -50 ~ +350
Environment Temperature: -20 ~ +70 Degrees Celsius
Measurement Medium: Liquid, Gas, Solid
Power Supply: 24VDC
Density Measurement: Available
Temperature Compensation: Available
Application Range: Gas, Liquid, Steam
Acc.: 0.1%F.S; 0.2%F.S, as Required
Trademark: Tosilon
Transport Package: International Export Carton Packing, Water Proof
Specification: CE
Origin: Shaanxi
HS Code: 902610000
Tosilon Coriolis Mass Flowmeter
Design and Manufacturing according to CE, ATEX Standard
Digital Coriolis Liquid Mass Flowmeter for Milk Coconut Oil Syrup (Ex Approved)IntroductionCoriolis Mass Flowmeter measure the force resulting from the acceleration caused by mass moving toward (or away from) a center of rotation. This effect can be experienced when riding a merry-go-round, where moving toward the center will cause a person to have to "lean into" the rotation so as to maintain balance.As related to flowmeter, the effect can be demonstrated by flowing water in a loop of flexible hose that is "swung" back and forth in front of the body with both hands. Because the water is flowing toward and away from the hands, opposite forces are generated and cause the hose to twist.
General Technical Parameters (For More Details, please contact Tosilon)Measurement Scope        Accuracy2kg/h~500t/h            ±0.2%~±0.15%
Work Pressure (0~32) MPa (in case of other high pressure, it must be of special order)
Medium Temperature        Measurement Accuracy -50Â
oC~ +350 Â
oC         ±1Â
oC
Environment Temperature-20Â
oC ~ +70Â
oC
Measurement MediumLiquid, gas, solid, or two phases and three phases mixed fluid
Power Supply 24VDC
Output Signal4-20mA current signal of flow, with load resistance ≤500Ω
0-10KHz frequency signal of flow.
RS485 Communication protocol
Material of Measuring Pipe      Response Time316L stainless steel         0.1s~5s, adjustable
Explosion-Proof GradeEx(ib)II BT2-T5
For more information, please contact Tosilon
Your Global Partner for Automation
www.tosilon.com
| Model |
DN |
Measurement scope (t/h) |
Work Pressure(MPa) |
Connection Type (mm) |
| TMF-1-5-A |
25 |
0~10 |
0~4 |
Flange 25 |
| TMF-1-5-B |
40 |
0~20 |
0~4 |
Flange 40 |
| TMF-1-6-A |
50 |
0~30 |
0~4 |
Flange 50 |
| TMF-1-6-AB |
65 |
0~50 |
0~4 |
Flange 65 |
| TMF-1-6-B |
80 |
0~100 |
0~4 |
Flange 80 |
| TMF-1-6-C |
100 |
0~150 |
0~4 |
Flange 100 |
| TMF-1-6-D |
150 |
0~300 |
0~2 |
Flange 150 |
| TMF-1-6-E |
200 |
0~500 |
0~2 |
Flange 150 |
SPC Pole Mould
Concrete Pole mould
Length: 6m-18m
Top diameter: 150mm-230mm/by buyer
Taper: 1:75/by buyer
Advantage: high quality, easy operation
Pre-stressed concrete pole mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory produces two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.
Features:
1. Welding technology, which enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the steel mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.
The Technical parameter:
|
Inside Diameter(mm)
|
Wheel Distance(mm)
|
Wheel Diameter (mm)
|
Length(mm)
|
|
Ø100
|
2000
|
Ø600
|
6-7
|
|
Ø110
|
2000
|
Ø600
|
6-7
|
|
Ø120
|
2000
|
Ø600
|
6-8
|
|
Ø130
|
2000
|
Ø600
|
6-8
|
|
Ø150
|
2000
|
Ø600
|
6-10
|
|
Ø170
|
2000
|
Ø600
|
6-12
|
|
Ø190
|
2000
|
Ø600
|
7-12
|
|
Ø190
|
2000
|
Ø650
|
15-18
|
|
Ø230
|
2000
|
Ø650
|
6-9
|
|
Ø310
|
2000
|
Ø650
|
6-9
|
|
Ø350
|
2000
|
Ø680
|
6-9
|
|
Ø390
|
2000
|
Ø750
|
6-9
|
Centrifugal Machine,Spun Prestressed Pole Mould ,Spc Pole Mould,Spc Pole Mould In Bangladesh
Jiangsu Haiheng Buiding-Materials Machinery Co.,Ltd , https://www.jshaiheng.com