C Shaped Purlin Roll Forming Machine, Maquina De Sanca Z C
Hard-plate has many years experience to fabricate the nearly full set of vertical mill internal wear parts. The fabrications are mainly made from chromium carbide hardfacing plates, which has abrasion resistant property and could make the service life last longer than carbon steel.
Bimetal welding wear resistant alloy steel plate, its substrate using common Q235B steel plate, and Wear-resisting layer is composed of advanced alloy welding which was joint research and development by our company and scientific research institutions. Cement Industry Feeder Cone,Chromium Carbide Ring Liner,Chromium Carbide Scraper Plate,Wear Sealing Ring Liner SHENYANG HARD WELDING SURFACE ENGINEERING CO.,LTD , https://www.hardfacingplate.com
C Type purlin section size
Model
Section size
H
B
B
C
t
C80
80
40
40
15
1.5-3.0
C100
100
50
50
20
1.5-3.0
C120
120
50
50
20
1.5-3.0
C140
140
50
50
20
1.5-3.0
C160
160
60
60
20
1.5-3.0
C180
180
60
60
20
1.5-3.0
C200
200
60
60
20
1.5-3.0
C220
220
70
70
20
1.5-3.0
C250
250
70
70
20
1.5-3.0
C300
300
80
80
20
1.5-3.0
C-Z Purlin Industry
C-Z Purlin is an integral part of light steel structure. C/Z purlin is made of hot rolled steel, hot rolled galvanized steel, hot dip galvanized steel and high strength steel. After the process of continues roll-forming, C/Z purlin gained the following features.
Features of Cee and Zee profile:
Dead weight is very light. The section performance in unit weight is excellent. For same area, steel quantity can be reduced, lowering the material costs.
It is of high strength. It can be closely connected, increasing the bearing capacity of the structure.
It is easy to install. It can be tailor made on large quantity. Digital scale, machine-made drilling and removing rust are finished in workshop. It can be installed once it is transported to the worksite.
Smooth surface, precise size, excellent rust-resistance property and long-term durability.
With the advantage of Cee & Zee purlin, they are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, exhibition center, cinema, theatre, garden in steel structure industry and so on. Â
1, The chrome plate is a kind of the spray welding technology to produce the high wear resistance, resistance to erosion of composite materials
2, The wear-resisting layer with high hardness has good wear-resistant performance, and the substrate have most widely using because of its moderate carbon, good comprehensive performance , strength and welding
3, This plate can be easily formed to suit curves and contours. Welded studs or countersunk inserts can be fitted so the plates can easily replaceable.
4, The chromium carbide allow this wear plate to be supported under extreme wear and strong impact including of truck deck liners, hoppers, shutes
5, The substrate is not fixed, the plate can be chose according to customers needing. Different thickness is allowed according to your demand.