Sewage cleaning method
1, first of all pay attention to the frequency of car wash, not too frequent, so it is easy to damage the sewage suction car paint. Pre solder Brass Fittings's solder ring is as smooth as yorkshire and it is real no lead according to Rohs,pre solder brass fittings,solder ring brass fittings,pegler solder ring brass fittings,connex solder ring brass fittings,SR brass fittings,solder ring brass pipe fittings presolder brass fittings,solder ring brass fittings,pegler solder ring brass fittings,connex solder ring brass fittings,SR brass fittings,solder ring brass pipe fittings Taizhou Runde Company , https://www.nerausmotor.com
2. Clean water should be used when washing the car, otherwise the fine sand in the sewage will be wiped with float paint. If the temperature in winter is relatively low, it should be cleaned with warm water.
3, to use a clean special car wash towel, the general friction of the towel is strong, it is easy to damage the sewage suction car paint, especially after the winter car wash immediately wipe the body of water in order to avoid residual icing on Damaged paint.
4. Car wash should be carried out in a cool and cool place. It is best to wash the car in the place where the sun shines.
5, in the car wash should pay attention to do some of the components of the sewage suction truck waterproof work, such as speakers, lights, door lock holes, etc., in order to avoid the failure of the horn, fog lights or winter door lock hole water after the ice door lock will not open .
6. Do not wash the car immediately after the sewage suction truck is running in winter. Wait until the engine temperature of the sewage suction car drops and then perform car washing so as not to damage the engine due to thermal expansion and contraction.