Colored Steel Tile Making Machine
The kitchen is really the most difficult place in life to clean. After cooking, there are oil fumes everywhere, and the bottom of the pot and range hood have oil dirt that is difficult to remove. It really takes too much time to clean up, of course, even if it takes time, some places can not be cleaned. ...... Wow, dishwashing paste really doesn't work too well! It's a complete cleaning artifact! Soak the cleaning paste with clean water and you can use it directly!
For example, some used dishes and chopsticks have lighter grease on the surface, which can be cleaned by wiping lightly, while the black burnt bottom of the pot and the yellow grease accumulated on the cooker hood can be easily removed. Rub several times. What an oily nemesis!
Although it is called dishwashing paste, in a fact, except for washing dishes, it can also wash many other things, it can wash almost the entire universe. For example, the dirt on the tiles, the scale on the faucet, the black stainless steel kettle, some unwashable shoe stains, the yellow spots on the clothes, etc., if only you can think of it, it can be cleaned by E&B dishwashing paste!
And the most important thing is that it is non-toxic and harmless, harmless to hands, harmless to the human body and the environment, safer washing, and healthier washing!
Dishwashing Paste 800g,Air Treatment Agent,Microbial Deodorant,Hypochlorous Acid Concentrate Guangzhou Yiqi Technology Co., Ltd. , https://www.gzyiqigf-dishwashingpaste.com
The colored steel tiles produced by this machine look beautiful ,elegant and noble .They are widely used as the roof of garden ,factory ,hotel,exhibition center and villa ,etc .
Â
No.
      item
Parameter(all is subject to our final design)
1
Â
Suitable raw material
Type
Common galvanized & pre-painted steel
Yield strength
235MPa(or other high strength steel)
Thickness(mm)
0.4-0.7
width(mm)
According to final design
2
Manual uncoiler's capacity
Max.5tons
3
Forming speed(m/min)
About 18-20m/min
4
Main motor power(KW)
7.5kw
5
Hydraulic power(KW)
3kw
6
Forming roller groupsÂ
Around19-20Â groups
7
Raw material of forming roller
High quality No.45 steel
8
Raw material of cutting blade
Cr12mould steel with quenched treatment
9
controlling system
Mitsubishi PLC& converter
10
Suitable industrial voltage
 According to your special requirement
11
Machine dimensions(L*W*H)
6.8m×1.8m×1.52m
12
Machine weight
About 9-10tons
Â
2-Machine componentsÂ
Tile forming machine consist of uncoiler, coil sheet guiding machine ,covering film device ,main roll forming system, pressing device,cutting device,Hydraulic station ,PLC control system and support table .
3.Working flow
uncoiling the sheet---guiding the sheet---covering the film---roll forming punching the step---measuring the length---cutting the panel---panels to the supporter