Plastic cap material and scope of application
Introduction: The best partner for plastic pipe caps: Plastic pipe caps are made of high quality plastics and heat-pressed by an injection molding machine. The material is flexible and is not afraid of pressure, water, moisture, dust, and easy installation. It is used for steel pipes. The best product. There are two kinds of plastic caps: inner caps and outer caps, which are suitable for steel pipe fittings. Thermoplastic plastic cap: refers to the plastic that melts when heated, can flow to the mold after cooling, and then melts after heating; then heating and cooling can be used to make it reversible change, that is, the liquid becomes solid, which is The so-called physical changes. General-purpose thermoplastics have continuous use temperatures below 100°C. Polyethylene, polyvinyl chloride, polypropylene, and polystyrene are also referred to as four general-purpose plastics. Type CKZ-B is sprag type freewheels, self contained, sealed and bearing supported, using two ball bearings. Unit is delivered oil or grease lubricated according to the type. One Way Bearing, one way clutch price, one way clutch bearing, one way clutch royal enfield price LLY PACK(foshan) Co.,Ltd. , https://www.llypack.com
The scope of application of plastic pipe wool is also very wide, including nuclear power, aviation, electronics, construction, precision instruments, oil, natural gas, chemical industry, food, water conservancy, electric power, pressure vessels, machining and other industries.
The inner race is keyed to the shaft, the outer race has a positive h7 tolerance to give a press fit in housing to H7 and it is screwed to the bond.
This type extensive used in machinery of packing, printing, paper making and so on, to realize backstop or overrunning in dual drives.