Who will be the third largest power source in China after coal-fired power and hydropower? Recently, the National Bureau of Statistics released the main data of industrial production above designated size in 2016. Data show that in 2016, the power generation reached 591.11 billion kWh. Among them, nuclear power generation was 212.7 billion kWh, an increase of 24.1% year-on-year, and wind power generation was 211.3 billion kWh, an increase of 19% year-on-year. From this statistical data, China's nuclear power generation has been comparable to wind power, and it is expected to become the third largest power source in China.
At present, high-voltage cable fault testers have different calibers for 2016 statistics of wind power and nuclear power generation. According to the data from the National Energy Administration, wind power generation reached 241 billion kWh in 2016, and the installed capacity of wind power was 19.3 million kilowatts in the same period, and cumulative installed capacity reached 149 million kilowatts. The number of wind utilization hours is 1,742 hours. It is worth noting that the amount of wind power generated by the National Energy Administration refers to the amount of electricity on the grid.
According to the nuclear power generation data released by the China Nuclear Energy Association, the cumulative power generation of high-voltage cable fault testers in 2016 was 210.519 billion kWh, a year-on-year increase of 25.07%. Among them, 19.659 billion kwh electricity was used on the Internet.
The amount of wind power generated by the National Bureau of Statistics is the production data of industries above designated size, and the statistical scope is that of enterprises with an annual main business income of more than 20 million yuan. Therefore, some wind farms with lower main income may not have been calculated, leading to low values.
Based on the above data, the current nuclear power generation may not exceed wind power generation, but the growth rate of nuclear power generation in 2016 is much higher than that of wind power, and the gap between nuclear power and wind power generation has narrowed obviously.
It is understood that wind power generation in China exceeded nuclear power for the first time in 2013. The amount of wind power generated during the year was 140 billion kilowatt-hours and nuclear power generation was 1080 billion kwh. This is mainly due to the fact that since the nuclear accident in Fukushima in Japan in 2011, China’s new nuclear power plants have experienced a temporary stagnation and the growth of power generation has also slowed down.
In recent years, the steady growth of nuclear power generation, high-voltage cable fault tester benefited from the stable operation of nuclear power plant installed. In 2016, a total of 7 nuclear power plants were put into operation in China. China Nuclear Energy Association statistics show that as of December 31, 2016, China has put into commercial operation of a total of 35 nuclear power units, with an installed capacity of 33.632 million kilowatts. At the same time, China’s nuclear power utilization hours were as high as 7042 hours, much higher than other power sources.
According to the “13th Five-Year Plan for Power Developmentâ€, by 2020, China’s nuclear power capacity will reach 58 million kilowatts, and wind power capacity will reach 210 million kilowatts. Compared with the data at the end of 2016, nuclear power installed capacity will increase by 72.5%, and wind power capacity will increase by 41%. Obviously, in the next four years, the increase in the installed capacity of nuclear power will be significantly higher than that of wind power. Calculated according to this ratio, in the case of no significant increase in the number of hours of wind power utilization, nuclear power generation exceeds wind power, becoming the third largest power source in China is a high probability event.
Bisphenol S Cas Number
Bisphenol S Cas Number. The bulk density is 6-0.5 g / cm3. Melting point 240-241 ℃. Soluble in aliphatic hydrocarbons, soluble in ethanol, isopropanol, 2-ethylhexyl alcohol, acetonitrile and acetone, slightly soluble in aromatic hydrocarbons, slightly soluble in ethyl acetate and methyl isobutyl ketone, insoluble in toluene and water. The product contains two hydroxyl groups and a sulfone group with strong electron absorption, so it is more acidic than other phenols. Low toxicity.
Bisphenol S Cas Number,Bisphenol S Analysis,Intermediates Of Glycolysis,Solidify Plastic Products
Jiangxi Hongjiu New Material Technology Co.,Ltd. , https://www.hongjiutech.com