Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 2.0-2.5mm
Yield Strength: 245-500MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm
Forming Station: 21steps
Cutter Material: Cr12 Tool Steel
Output: About 15-20meters Per Minute
Housing: H500 Beam
Trademark: BMS
Transport Package: Main Body of High Speed Metal Stud and Track Roll
Specification: about 10600*1500*1400mm
Origin: China (Mainland)
Working Material: Galvanized Sheet(Gi),Cold Roll Steel(CRC),Hot Roll
Thickness: 2.0-2.5mm
Yield Strength: 245-500MPa
Decoiler: Manual/Hydraulic for Options
Side Wall Thickness: 18mm
Shaft: 75mm
Forming Station: 21steps
Cutter Material: Cr12 Tool Steel
Output: About 15-20meters Per Minute
Housing: H500 Beam
Trademark: BMS
Transport Package: Main Body of High Speed Metal Stud and Track Roll
Specification: about 10600*1500*1400mm
Origin: China (Mainland)
1. Details of  Cable Tray Industary Roll Forming Machine
Material |
Material Thickness(&):2.0-2.5mm |
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa |
Machine Components |
1)Manual Decoiler: one set |
Max. feeding width: 500mm, coil ID range 470mm±30mm |
Capacity: Max. 3Ton              Â
Â
|
2)Â Â Cold Rolling Mills: |
Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)  ;  Â
           Â
|
Motor Driving,Gear chain transmission, 27 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling) |
Main Motor=15KWÂ , Frequency speed control |
Forming speed approx.12-15m/min |
3)Hydraulic Cutting device |
hydraulic motor: 11KW, Hydraulic pressure range: 0-16Mpa |
Cutting tool material: Cr12, Heat treatment |
Cutter frame made from high quality 20mm steel plate by weld |
Pre-punching & Pre-cutting,  stop to punching, stop to cutting, |
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo) |
Control the quantity and cutting length automatically |
Combined with: PLC, Inverter, Touch Screen, Encoder, etc |
Cut-to-length tolerance≤±1mm |
Control Voltage 24V |
5) Exit Rack Un-powered, two units        |
2. Machine Features of Cable Tray Industary Roll Forming Machine
The advantages of cable tray industary roll forming machine as follows:
1.Easy operation, low maintenance cost
2.Material saving
3.Type of penel is wide used.
4. High requirments for finished productsÂ
Certifications

Â
Â
Our Service                                                                         Â

Â
Pre-Sales Service
* Inquiry and consulting support.Â
* Profile drawing and roll forming solution.Â
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
Packaging & Shipping

(1)Â Main body of machine
 is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in 1x40GP container with steel rope and lock catch suitable for long-distance transportation, spare parts are covered by plastic film.Â
(2)Â With even lifting point in the machine for easy container loading and uploading.
Company information                                                   Â
Company Show

                       Â
Factory Show

BMS Machine (formerly named as HF BRAND FORMING MACHINERY CO.,LTD) was established in 1996,which covers an area of MORE THAN 20000 SQUARE METERS. With 20 YEARS PROFESSIONAL EXPERIENCE, we have been the TOP 3 manufacturer and exporter of cold roll forming machines in China. We are an ISO9001 approved company, and have European CE certification (issued by SGS). We have the honor to serve some of the famous companies in the world such as TATA STEEL,BLUESCOPESTEEL, BRADBURY MACHINERY,etc.
We manufacture wide range products of metal sheet cold roll forming machines as follows: 1) for Metal Building Industry/PEB (Pre-Engineering Building): HAYES style quick change CZ purlin machine(including automatic and quick-change type C purlin machine and Z purlin machine), light gauge steel framing machine(LGSF, Howick and SCOTTSDALE style), roof panel forming machine, corrugated panel roll forming machine, curving machine, glazed tile roll forming machine, floor decking machine, ridge cap roll forming machine, cladding facade system forming machine, cut-to-length slitting line etc., as well as some hydraulic shearing machine, hydraulic folding machine for gutter and flashing, etc.
1. Details of  Cable Tray Industary Roll Forming Machine
Material |
Material Thickness(&):2.0-2.5mm |
Applicable material:Galvanized Steel Coils, Hot Rolled Coils,Cold Rolled Coils,yield strength 245Mpa or 550Mpa |
Machine Components |
1)Manual Decoiler: one set |
Max. feeding width: 500mm, coil ID range 470mm±30mm |
Capacity: Max. 3Ton              Â
Â
|
2)Â Â Cold Rolling Mills: |
Rollers manufactured from bearing steel GCr15,precision machined,hard Chrome Coated with thickness 0.04mm(for longer life and anti-rust)  ;  Â
           Â
|
Motor Driving,Gear chain transmission, 27 forming stations and 7 rollers(3 upper rollers and 4down rollers)for straightening and levelling) |
Main Motor=15KWÂ , Frequency speed control |
Forming speed approx.12-15m/min |
3)Hydraulic Cutting device |
hydraulic motor: 11KW, Hydraulic pressure range: 0-16Mpa |
Cutting tool material: Cr12, Heat treatment |
Cutter frame made from high quality 20mm steel plate by weld |
Pre-punching & Pre-cutting,  stop to punching, stop to cutting, |
4)PLC Control System(Touch screen brand:Taiwan WEINVIEW,Inverter brand:Finland VOCAN/Denmark Danfoss ,Encoder brand: Japan Koyo) |
Control the quantity and cutting length automatically |
Combined with: PLC, Inverter, Touch Screen, Encoder, etc |
Cut-to-length tolerance≤±1mm |
Control Voltage 24V |
5) Exit Rack Un-powered, two units        |
2. Machine Features of Cable Tray Industary Roll Forming Machine
The advantages of cable tray industary roll forming machine as follows:
1.Easy operation, low maintenance cost
2.Material saving
3.Type of penel is wide used.
4. High requirments for finished productsÂ
Certifications

Â
Â
Our Service                                                                         Â

Â
Pre-Sales Service
* Inquiry and consulting support.Â
* Profile drawing and roll forming solution.Â
* View our Factory.
After-Sales Service
* Training how to instal the machine, training how to use the machine.Â
* Engineers available to service machinery overseas.
Packaging & Shipping

(1)Â Main body of machine
 is naked and covered by plastic film(to protect of dust and corrosion),loaded into container and steadily fixed in 1x40GP container with steel rope and lock catch suitable for long-distance transportation, spare parts are covered by plastic film.Â
(2)Â With even lifting point in the machine for easy container loading and uploading.
Company information                                                   Â
Company Show

                       Â
Factory Show

BMS Machine (formerly named as HF BRAND FORMING MACHINERY CO.,LTD) was established in 1996,which covers an area of MORE THAN 20000 SQUARE METERS. With 20 YEARS PROFESSIONAL EXPERIENCE, we have been the TOP 3 manufacturer and exporter of cold roll forming machines in China. We are an ISO9001 approved company, and have European CE certification (issued by SGS). We have the honor to serve some of the famous companies in the world such as TATA STEEL,BLUESCOPESTEEL, BRADBURY MACHINERY,etc.
We manufacture wide range products of metal sheet cold roll forming machines as follows: 1) for Metal Building Industry/PEB (Pre-Engineering Building): HAYES style quick change CZ purlin machine(including automatic and quick-change type C purlin machine and Z purlin machine), light gauge steel framing machine(LGSF, Howick and SCOTTSDALE style), roof panel forming machine, corrugated panel roll forming machine, curving machine, glazed tile roll forming machine, floor decking machine, ridge cap roll forming machine, cladding facade system forming machine, cut-to-length slitting line etc., as well as some hydraulic shearing machine, hydraulic folding machine for gutter and flashing, etc.
Flange And Fittings
Exhaust Flange,Welding Flange,Steel Flange
Precision CNC Machining Parts,CNC Machining Parts Co., Ltd. , http://www.chcncmachining.com