Floor Decking Roll Forming Machine Manufacturer
Steel Plate
A Carbon Steel Plate has usually been considered as the steel that does not contain much alloy steel elements, also named as mild steel. Generally, elements are C, Mn, P, S, Si, besides these, there are no minimum limits for elements of Al, Cr, Ni, Mo, V, etc.
Carbon steel plates are available in different grades depending on the carbon content and strength.
As the content of Carbon increase, the steel plate hardness increases.
Low carbon steel plate: For carbon content 0.06% to 0.25%, also we call it Mild Steel Plate.
Medium carbon steel plate: C content from 0.25% to 0.55%.
High carbon steel plate: 0.55% to 1.0%, also called hard steel plate.
Low carbon steel is the most common form, and it's very malleable and ductile. Medium carbon steel balances ductility as well as strength for excellent wear resistance. High carbon steel is exceptionally strong, while ultra-high carbon steel can be tempered to even greater hardness but no malleability.
As the percentage of carbon gets larger, steel can become harder and stronger through heat-treating. Carbon steel is usually heated to change the mechanical properties of steel, usually ductility, hardness, strength, and resistance of impact. Increasing the carbon content of carbon steel makes it harder and stronger, but reduces the steel`s ability to be welded, making it more brittle.
Carbon steel plate is most often used for structural purposes such as buildings, yet it has the flexibility to be worked into ornate designs. Low carbon steel sheet (wrought iron) is typically used for fences, chain links, gates, and railings. Structural steel (medium carbon steel) is used in cars, refrigerators, washing machines, buildings, and bridges. The steel sheets are normally made up of medium carbon steel.
Carbon Steel Plate,Pressure Vessle Steel Plate,4130 Alloy Steel Plate,Abrasion Resistant Steel Plate Shandong Guanzhou Iron and Steel Group Co., Ltd , https://www.shansteelsupply.com
1
Suitable to process
Color steel plate
2
Width of the plate
1000mm,1200mm
3
Roller
26rollers
4
Dimensions
10*1.45*1.51m
5
Power
7.5+5.5kw
6
Thickness of the plate
0.8-1.2mm
7
Productivity
8-10m/min
8
Material of the cutting blade
Cr12
9
Diameter of the roller
Φ70mm
10
Weight
About 6.8T
11
Voltage
380V 50Hz 3phases
12
Control system
PLCÂ control
Working flow:
manual uncoiler-roll forming machine-computer control system-hydraulic system-forming part-cutting part-discharge tableÂ
No
Technical Specification
1
Manual Uncoiler
Usage:It is used to support the Steel Coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm
2
Feeding Table
Put the raw material(Steel Plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3
Main Roll Forming Machine
Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
4
Hydraulic System
Computer Control Cabinet
Power:5.5kw,Hydraulic oil: 40#
hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job.
The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use
PLC:EURA
5
Shearing Mechanism
It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products.
Material of blades: Cr12,quenching treatment
6
Output Table
Â
It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.
Company Introduce:
Our enterprise, Cangzhou Dixin Roll Forming Machine Co., Ltd, as the professional and leading manufacturer, can manufacture, design, installation and debug various roll forming machines and metal processing sheet equipments, which produce metal roof wall panel, glazed roof tile, CZ steel purlin, floor decking, roof ridge cap, sandwich panel, roof truss, shutter panel, shutter slat, door frame, guardrail, and metal sheet uncoiler, bending, slitting, cutting, flattening, punching, crimping.
Backed by reasonable design, precision machining and selected material, both our standard and customized machines are characterized by long life span, precise forming and easy operation. With our customers' trust, our machines have been sent to America, Australia, Russia, India, Sri Lanka, Nigeria, Pakistan, Uzbekistan, Mozambique, Angola, Turkey, Brazil, etc.
Warmly welcome to China to visit our factory and select the machines you need. Our address,Fuzhuang Industrial Development Zone, Botou City, Hebei Province, China
Our Services
First,we can produce the special machine,send your drawing to us,we can design for you.
Â
Second,if you buy our products,we also can help you to purchase the material,like color roll,the price is lower than you buy by yourself.
Â
Third, we provide a one year warranty and lifelong technical support,we can send our technicians to you to give you on-site training.
Â
Four,engineers available to service machinery overseas.
Â
Â
Five, if you come to visit our factory,we can book the room for you,car pick up to send.
FAQ
1. Q: Are you manufacture or trading company?
   A: We are manufacture who was signed in 2008. And our boss has ten years' experience in machinery.
Â
2. Q: When did u start producing roll forming machine?
   A: Our company was signed in 2008, and our boss has ten years' experience of machinery.
Â
3. Q: Why should I choose you?
   A: We have years' experience to design and provide lower price for customer.
Â
4. Q: How many kinds of products do you produce?
    A: We have produced dozens shape of panels including trapizoid, glazed, roof ridge and door panel, and so on for customers during last years. We also provide EPS and rock wool panel line.
Â
5. Q: Where is your factory located? How can I visit there?
    A: Our factory is located in Botou, Hebei province. We could pick you up from Cangzhou Station or Beijing airport when you come.
Â
Any other question,please feel free to contact me. Tel:+86 18231737651