Bea Type Corrugated Fasteners W9 Series 3/8" Length

August 03, 2023

Model NO.: Item: W9 Length: 11/32"
Transport Package: 24PCS/Stick 5760-13824PCS/CTN
Specification: CROWN: 24.8mm THICKNESS: 0.5mm
Origin: China
HS Code: 7317000000
We are the manufacturers of corrugated fastener/joint pins/wood joiners used in plywood flush doors, wooden frames, etc. These are available in different sizes 3/8", 1/2", 5/8",3/4" in bulk production. Very high quality hard and sharp to easily pierce into wood.

 Corrugated fasteners are made of 18- to 22-gauge sheet metal with alternate ridges and grooves. One end is cut square, and the other is sharpened, with beveled edges. These fasteners are made in different lengths and widths. The width varies from 5/8 inch to 1-1/8 inches, and the length ranges from 1/4 to 3/4 inch. Corrugated fasteners are used to fasten parallel boards together. Typical uses for corrugated fasteners are in mitered corners, butt joints, and end joints. Corrugated fasteners have greater holding strength than nails in small timber. They are driven with a hammer. 
W Series Corrugated Fasteners
Fit tools of BeA W15,and most 25mm crown corrugated tools in the market.
 
ITEM LENGTH PCS/BOX BOXES/CTN
W6 1/4" 6.0mm 13824 72
W9 11/32" 8.8mm 9216 72
W12 1/2" 12.0mm 6910 72
W15 5/8" 14.4mm 5760 72
Bea Type Corrugated Fasteners W9 Series 3/8Bea Type Corrugated Fasteners W9 Series 3/8
 

Automatic 3D Fiber Laser Pipe Cutting Machine

Technical advantages:

1. Excellent and efficient processing: Five-axis linkage of the bus system realizes space leapfrog and flying cutting technology, and improves efficiency by more than 20-50%.

2. Pipe cutting system: user-friendly and easy to operate, with sufficient pipe process database.

3. Special bed design:reinforced integrated welding bed, after annealing and twice aging treatment, with good stability.

4. Simple and convenient maintenance: the front chuck has good sealing performance and is more durable against dust; The rear chuck blows air automatically, and the pipe wall is cleaner.

5. Automatic feeding rack(optional): realize automatic clamping, pushing and accurate feeding with fast cyclic feeding speed.

6. Good quality and high precision: front and rear full stroke precision pneumatic chuck, multi axis linkage at the same time, good cutting effect and high precision.

7. A15: Double chuck short tailing:the cutting head spans from the front to the back of the front chuck and cuts the last workpiece.The tailing ≥ 40mm can save more material costs.

8. Excellent processing performance: it adopts high rigidity thickened bed, with bus pipe cutting system and bus motor which has faster processing speed and higher precision.

9. Slag extraction system (optional): solve the problem that there is no residue on the inner wall of the pipe, eliminating the secondary vibration polishing process.

10. High efficiency feeding system (optional): high rigidity design of feeding rack, stable and fast feeding and refueling, and the cycle time is about 10 seconds.

Laser Cutting Machine Metal,Automatic Pipe Cutting Machine,Automatic Steel Pipe Cutting Machine,Tube Fiber Laser Cutting Machines

GUANGDONG CHITTAK INTELLIGENT EQUIPMENT CO.,LTD , https://www.chittakcutting.com