Electronic Tensile Testing Machine Common Troubleshooting Solutions
Electronic tensile testing machine can test tensile, compressive strength, elongation and elongation of various materials, semi-finished products and finished products. It can be used for tests such as peeling, tearing, bending, bending and compression. It is suitable for metal and plastics. , rubber, textiles, synthetic chemicals, wire and cable, leather and other industries. When the tension testing machine encounters some troubles in the daily operation process, what should we do? The following introduces you to a few common fault handling, so that our customers can better extend the service life of electronic tensile testing machine. First, the power of the tester's main unit is off, and it cannot move up and down. How to deal with? The solution is to check whether the power circuit of the access tester is connected properly; check whether the emergency stop switch is in the screwed up state; check whether the power supply voltage of the access tester is normal; check whether the insurance on the machine socket is blown, remove the spare fuse. Install it. Second, the test machine mains power but the device can not move up and down. How to deal with? The solution is to check whether the device can not be moved after 15S (time), because the host needs to self-test power, it takes about 15S; check whether the upper and lower limit position is appropriate, there is a certain amount of running space; check the access test machine The power supply voltage is normal. 3. After the computer software is online, information appears in the message box indicating overload. How to operate? The solution is to check whether the communication line between the computer and the testing machine is off; check whether the on-line selection sensor is correct; check whether the sensor has been bumped during the latest test or keyboard operation; check whether the calibration or calibration function of the software is used before the problem occurs; Check if the calibration, calibration, or other parameters in the hardware parameters have been manually changed. Changzhou Jinxin ARTS & CRAFTS Co.,Ltd , https://www.stageconfettifx.com