Guangzhou Qi Chuan sales increased by 28% in July. Two SUVs are listed this month


In order to build “high-end independent brands” as the core of development, GAC Group’s autonomous passenger vehicles (hereinafter referred to as GAC Express) continuously improve the product matrix in the course of 7 years of development, and the sales volume has been increased. China Netcom learned from Guangzhou Automobile's official website that the brand's sales in July reached 38,965 units, up 28.2% year-on-year, and the cumulative sales from January to July 2017 reached 289,843, an increase of 52.43% year-on-year.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

Guangzhou Automobile Chuanqi sold 38,965 vehicles in July this year, an increase of 28.2% year-on-year. In January-July 2017, cumulative sales reached 289,843, an increase of 52.43% year-on-year. Among them, the brand new flagship SUV GS8 has become more and more stable. This year, it has sold more than 50,000 units.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

After the introduction of the GS8, Guangzhou Auto Transmission Co., Ltd. continued to lay out the SUV field, introducing a new small-sized SUV GS3 and a new medium-sized five-seat SUV GS7 positioned slightly lower than the GS8. The two new models will be officially listed on August 26. The GS7 has already announced a pre-sale price range of 15.58-22.98 million yuan at the Shanghai Auto Show this year.

New medium-sized five seat SUV GS7

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

Chuan Qi GS7 appearance of the overall style of hardcore, straight front of the square line full of sense of power, with a large grille is even more tough. All LED headlights have sharp lines and a layered design with four LED modules in a matrix layout. The taillights are very individual in shape and use a double U-shaped design, echoing the shape of the headlights, with a sense of depth.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

Chuan Qi GS7's length and width were 4730/1910/1770 mm, wheelbase of 2720 mm, 80 mm shorter than the GS8, other parameters the same.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

The new car interior adopts a black/beige two-tone system. The sturdy steering wheel is wrapped in leather and is basically consistent with the Chuanqi GS8 design style. The front dashboard is a double-circle design with a colored computer display in the middle that can display a wealth of information in the vehicle. From the control zone, it can be seen that there is a timely four-wheel drive. The new car is also equipped with a panoramic sunroof, in line with the preferences of Chinese consumers.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

In terms of power, according to the Ministry of Industry and Information Technology, the new car will carry a 1.8-liter and 2.0-liter turbocharged engine. The 1.8-liter engine has a rated power of 138 kW, which matches the manual transmission. The 2.0-liter engine has a rated power of 148 kW, a maximum torque of 300 Nm and a combined fuel consumption of 8.5 litres per 100 km. In the highly equipped model with a timely four-wheel drive system, the comprehensive fuel consumption per 100 kilometers is 8.9 liters.

New Small SUV GS3

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

In terms of appearance, the new car in the network uses multiple banner style design, irregular light groups on both sides have a strong degree of recognition, and the interior with a lens; the body side of the line is smooth, a line through the body of the waist full of three-dimensional. In addition, the new car is also equipped with uniquely shaped multi-spoke rims.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

The GS3's tail uses more horizontal lines. The convex ridges on the trunk cover are used to create a more three-dimensional sculptural effect. At the same time, they also play a role in stretching the vehicle's lateral visual effects. The taillights on both sides of the new car adopt a triangular design. Add LED light source, lighting effect is very eye-catching. The two sides of the bottom of the GS3 are designed to have two round and round tails on both sides of the design, together with silver shields to highlight the sport.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

In the interior, the center console of the new car adopts a "T" design style and uses a large area of ​​soft material to enhance the interior trim of the vehicle. The GS3 is equipped with a three-spoke multifunction steering wheel and the instrument panel has a rectangular design. The center console is equipped with a large-size display. The layout of the combination buttons below is coordinated and the overall layout is clear. In addition, the right side of the steering wheel is suspected to be equipped with a button to start the button, and the air outlets on both sides are more exquisite.

广汽传祺7月销量,7月汽车销量,7月汽车销量排行榜

From the information released by the Ministry of Industry and Information Technology of the People's Republic of China, the Guangzhou Qichuan GS3 will carry a 1.5-liter naturally-aspirated engine of the 4A15K1 model and a 1.3-liter turbocharged engine of the 4A13M1 model. Among them, the 1.5-liter engine has a rated power of 84 kilowatts, the combined fuel consumption per 100 kilometers is 6.9 liters, the 1.3T engine has a rated power of 101 kilowatts, and the combined fuel consumption per 100 kilometers is 6.7 liters.



Low-Pressure Auto Parts

This classification mainly includes the aluminum low-pressure casting Machinery Parts using in auto area.
From the part, we can easily find that the parts have a lot of features of big cavities, so the part will have big potential risk of mold release problem, if so, the part may happen to be deform, sticking to the mold etc, especially when the part sticking to the mold, if no clear in time, while next shot, the mold may be destroyed while clamping.
Normal raw material: A356.ZL101A.ZL101.AlSi7Mg
Process Technology: Low-pressure casting,T6 Treatment,Shot Blasting,NC Machining,Spray Coating
Product Dimensions: Customized
Casting General Tolerance: Grade GBT6414-CT8
Flow Processes: Die casting, Degating to remove the residual of the gate, Polishing and Deburring to remove the burrs, Polishing to remove the parting line, flash,CNC Turning, Cleaning, Packaging, Storaging, Shipping
Control Measure: Incoming Material Test, First Article inspection, Routing inspection, Final item inspection, and Outgoing quality control
Inspection Equipment: CMM, Caliper, Plug Gage, Screw Gauge
Application: Machinery Parts
Certificate: IATF16949:2016,ISO14001:2015,ISO45001:2018
Lead Time: 30-35 days
Trade Term: FOB Ningbo

Low-Pressure Casting Auto Part,A356 Low-Pressure Casting Parts,ZL101A Low-Pressure Casting Parts

NINGBO ZHENHAI BOLANG METAL PRODUCTS FACTORY , https://www.casting-part.com