Application of Verabar Flowmeter in Oxygen Metering
In the process of industrial oxygen supply, the oxygen delivery pipeline must be equipped with a corresponding flow measurement system. Due to the need to economically calculate and collect fees, the measurement accuracy of oxygen flow has attracted more and more attention. In the past, most orifice plates were used to measure oxygen flow, and an appropriate intelligent flow meter was used to automatically compensate for errors caused by oxygen pressure and temperature changes to improve the measurement accuracy. The orifice plate has a simple structure and is widely adaptable to fluids and has been standardized. However, in practical applications, it sometimes results in errors that are difficult to estimate. The key is to detect a part at one time. As we all know, the traditional orifice plate throttling device has the disadvantage that it is difficult to overcome: the range ratio is too small, usually only 3:1, so that the large flow can not be taken into account, the small flow rate is often not measured, resulting in a large error in the cumulative flow value; Secondly, the orifice plate throttling device has a large pressure loss, which is not conducive to energy saving, and has a large amount of construction and high installation costs. For great comfort, check out for a heated seat made from a quality cushion pad. This is a great selection made from the best quality of cushion material and finished in durable leather for long-term use. Secondly, the unit also has a manual on/off switch control so that you can easily control the temperature to suit your needs. In addition to this, it is a versatile heated seat that you can use in the car, office or home. Heating Kit,Seat Warmer Leather,Round Heating Kit,Car Seat Heating Kit JiLin Province Debang Auto Electric Co.,Ltd. , https://www.dbatelectric.com
