Applicable Industry: Mainly used for drilling tube plate, flange and large plate in petrochemical, boiler, wind power, flange industries and also for connection plates in building, bridge, heat exchange, iron tower industries. Drilling, tapping and light milling for workpieces. The carbide drill can be used for internal cooling high speed drilling, and high speed twist drills can be used to external cooling drilling.
Product feature: The machine is mainly composed of bed and longitudinal slipway, gantry and horizontal slide table, vertical ram type drilling spindle box, worktable, chip remover, hydraulic system, cooling system, centralized lubrication system, electrical system, pneumatic system and other parts. 1. Heavy-load linear roller guide pairs (HIWIN, Taiwan) are equipped on two sides of the machine bed respectively. The longitudinal movement of the gantry's two sides is driven synchronously via Panasonic AC servo motor and precise ball screw pair of big pitch.          Â
Two movable slides are equipped on the cross beam of gantry. The sliders are guided by two linear roller guide pairs and driven by AC servo motor and precise balls crew pair of big pitch respectively.
Â
The slides on the cross beam are equipped with vertical CNC feeding ram-type drilling spindle, which adopts special conversion motor with heavy load for spindles. The motor drives the spindles via synchronous belt, stepless speed regulating, low speed with high torque. The drilling spindles (BT50) adopts Taiwan precision spindles (inner-cooling) with sweep device and disk spring automatic broach mechanism, hydraulic cylinder loosing cutter, very convenient to change shank.
Â
The hydraulic system solenoid valves adopt ATOS of Italy with stable quality.
                   5. The gantry adopts steel plate welded structure, through heat aging stress, with stable precision. The machine bed, worktable, vertical slide board, transverse sliding rams are all adopt high quality iron castings.          6. There are several horizontal T-slots on the worktable, which are used for clamping clamps and tube plate parts.          Â
It adopts FAGOR8055 CNC systems of Spain, equipped with RS232 interface and LCD screen. Drilling coordinate CAD/CAM direct conversion can be realized. With pre modeling and review function before drilling holes, convenient for operation.
                            Â
Â
It is equipped with chain-plate type automatic chip-conveyor and chip collection trolley. The cooling system is equipped with paper filer, high-pressure inner-cooling pump and low-pressure outer-cooling pump, which are used for inner-cooling or outer-cooling of cutter. Coolant can be recycled.
                 9. The machine X, Y axis guide rails and lead screws are equipped with shields. X axis is equipped with steel plate protection cover, Y axis is equipped with organ type protective cover 10. In order to ensure the reliability of the machine tools, the key parts are imported with high quality, details see the main configuration list. 11. Workpieces positioning alignment and clamping. For square workpeice to find the reference block is available on a supporting plate of T slot is fixed on the X and Y in two directions, the reference block square workpiece two adjacent tightly on the side of X and Y on the two direction; for aligning circular workpiece from square workpiece, the two adjacent quadrant reference block stick tight in the X and Y two direction. For easy moving heavy workpieces can be placed in any supporting plate T slot on the center position by edge finder in spindle hole in the measured workpiece diameter (or inner diameter) three points, through the computer CNC program the calculation is accurate and rapid. Workpiece clamping is composed by plate, rod, clamping rod and pad etc., easy to use.
Specifications:
Model
TPHD12025-2
Max. workpiece size
12000x2500mm
Max thickness
150mm
Work table
Width of T slot
28/500mm
Load bearing
3t/
Vertical slide type drill head
Quantity
2
Main spindle taper hole
BT50
Max drill diameter
Φ50mm (Carbide drill)
Φ65mm (HSS drill)
Main spindle speed
30-2400r/min
Motor power of spindle
2x37kW
Spindle stroke (mm)
500
Distance between spindle lower end to worktable (mm)
Mesh ball bags are bags made of mesh material that are designed to carry and store sports balls. These bags are typically used by coaches, athletes, and sports enthusiasts to transport and organize their sports equipment.
Mesh ball bags come in a variety of sizes and shapes to accommodate different types of sports balls. They can hold a single ball or multiple balls, depending on the size of the bag. Some bags are designed with a drawstring closure, while others have a zipper closure to keep the balls secure.
Mesh ball bags are made of durable materials that can withstand the wear and tear of regular use. The mesh material allows air to circulate through the bag, which helps to prevent the growth of bacteria and mold. This makes them ideal for storing wet or sweaty sports balls.
Mesh ball bags are lightweight and easy to carry, making them a convenient option for coaches and athletes who need to transport their equipment to and from games and practices. They can be carried by hand or worn over the shoulder using a strap.
In addition to their practical use, mesh ball bags can also be customized with team logos and colors, making them a great way to show team spirit and promote team unity. They are also affordable and readily available, making them a popular choice for sports teams and organizations.
Mesh Ball Bags,Mesh Ball Carrying Bags,Basketball Duffel Bag,Mesh Ball Bag