Plastic Actuator Pneumatic Angle Seat Valve with Thread/Clamp/Weld/Flange Connection
1). Nominal Diameter: DN15-100 1). Nominal Diameter: DN15-100 The tent is typically set up in an
area where there is a risk of contamination, such as a disaster site, chemical
spill, or infectious disease outbreak. The decontamination process
typically involves a series of steps, including removing contaminated clothing,
washing with soap and water, and rinsing with a decontaminating solution. The
tent is equipped with a shower system, water supply, and drainage system to
facilitate the decontamination process. Decontamination tents are
commonly used by emergency responders, military personnel, and healthcare
workers to prevent the spread of hazardous materials or infectious diseases.
They are also used in industrial settings to decontaminate equipment and
materials before they are transported or disposed of. Fields of use
involve decontamination, rescue purposes, fire fighting and sanitation. For their
inflatable tubes, their setup can be completed in seconds or several minutes
with an electrical air pump. The decontamination tents can divided into two
types: one is Decontamination Cabin for single use and the other is mass
decontamination tent for multiple people. Decontamination Tent,Inflatable Decontamination Tents,Orange Inflatable Decontamination Tents,Hazmat Decon Tents Yangzhou Canway Outdoor Equipment Co.,Ltd , https://www.yzcanway.comPlastic Actuator Pneumatic Angle Seat Valve With Thread/Clamp/Weld/Flange Connection
FeaturesÂ
1. Easy to Install
2. Infinitely Rotable Actuator Allows Pneumatic Connection in Any Postion
3. 50% More Economical Than Ball Valves
4. 600% Longer Service Life Than Ball Valves
5. Compact Design
6. Fast Response
7. Water hammer-free
SpecificationsÂ
2). Pressure Range: 0-1.6Mpa
3). Medium Temp.: -10°C~+180°C
4). Ambient Temp.: -10°C~+60°C
5). Operating Pressure: 3-8bar
6). Valve Body Material: Stainless Steel, CF8/304,CF8M/316
7). Sealing Material: PTFE
8). Actuator Material: Plastic, Stainless Steel, CF8/304, CF8M/316
9). Medium: Neutral Gas, Air, Water, Vapor
10). Connection: Flanged, Clamped, Welding, Thread (BSP, BSPT, NPT)
11). Type: Double-acting, Single-acting, Water-proof Hammer
Option: Manual Position-Limit Actuator
This kind of actuator can adjust the piston opening, limit travel and adjusts the valve flow. It is applicable to all types of angle seat valve and also used for emergency brake when air supply is failed or mechanical (solenoid) failure occurs.
Product Details Show
Product Processing Show
Product Packing
Product Application
Factory Show
Contact Us
Mob: +86-13600679517; +86-18057721628
Â
Web: www.tychenfluid.com
Plastic Actuator Pneumatic Angle Seat Valve With Thread/Clamp/Weld/Flange Connection
FeaturesÂ
1. Easy to Install
2. Infinitely Rotable Actuator Allows Pneumatic Connection in Any Postion
3. 50% More Economical Than Ball Valves
4. 600% Longer Service Life Than Ball Valves
5. Compact Design
6. Fast Response
7. Water hammer-free
SpecificationsÂ
2). Pressure Range: 0-1.6Mpa
3). Medium Temp.: -10°C~+180°C
4). Ambient Temp.: -10°C~+60°C
5). Operating Pressure: 3-8bar
6). Valve Body Material: Stainless Steel, CF8/304,CF8M/316
7). Sealing Material: PTFE
8). Actuator Material: Plastic, Stainless Steel, CF8/304, CF8M/316
9). Medium: Neutral Gas, Air, Water, Vapor
10). Connection: Flanged, Clamped, Welding, Thread (BSP, BSPT, NPT)
11). Type: Double-acting, Single-acting, Water-proof Hammer
Option: Manual Position-Limit Actuator
This kind of actuator can adjust the piston opening, limit travel and adjusts the valve flow. It is applicable to all types of angle seat valve and also used for emergency brake when air supply is failed or mechanical (solenoid) failure occurs.
Product Details Show
Product Processing Show
Product Packing
Product Application
Factory Show
Contact Us
Mob: +86-13600679517; +86-18057721628
Â
Web: www.tychenfluid.com