SMP Series 2/2 Way Direct Acting Water Air Gas Normally Closed Solenoid Valve (SMP1DF02N1B03)

  • Model NO.: SMP SERIES
  • Connection Form: Thread
  • Material: Brass
  • Valve Structure: Direct Acting Solenoid Valve
  • Usage: Flow Control
  • Application: Industrial Usage, Water Industrial Usage, Household Usage
  • Valve: 3.00mm
  • Low Power Solenoid Valve: NBR
  • Transport Package: Export Carton
  • Origin: Yuyao, Zhejiang, China
  • Actuator: Electric
  • Type: Direct Acting
  • Pressure: Ordinary Pressure
  • Power Supply: AC & DC Solenoid Valve
  • Standard: DIN
  • Solenoid Valve: 1/4′′
  • Water Valve: 0~30bar
  • Trademark: SANLIXIN
  • Specification: TUV & ISO & CE
  • HS Code: 8481804090
2/2 way normally closed direct acting solenoid valve, closed when de-energized, open when energized.
The product is special design, power will be normal type 1/4, loe temperature, small in size, large flow rate, widely use.
Body material: forged brass, SS304,SS316
Ambient temp. 0~65  Fluids temp: 0~130
Flow as the arrow, mounts in any position; best position is solenoid vertical and upright direction.
Voltage: AC220V/230V/110V/120V  DC24V/12V  
Voltage tolerance: +10%~-10% applicable voltage.
This series valve are offered NBR,VITON,EPDM etc for seals and diaphragm to provide on-off various fluids.
 

 

 
 
 (mm)
 
  bar
   
SMP1MF02N1A02 1/8 2 30 NBR  
SMP1MF02N1AC3 1/8 2.5 30 NBR  
SMP1MF02N1A03 1/8 3 30 NBR  
SMP1MF02N1A05 1/8 5 13 NBR  
SMP1MF02N1A06 1/8 6 9 NBR  
SMP1MF02N1B02 1/4 2 30 NBR  
SMP1MF02N1BC3 1/4 2.5 30 NBR  
SMP1MF02N1B03 1/4 3 30 NBR  
SMP1MF02N1B05 1/4 5 13 NBR  
SMP1MF02N1B06 1/4 6 9 NBR  
SMP1MF02N1C03 3/8 3 30 NBR  
SMP1MF02N1C04 3/8 4 25 NBR  
SMP1MF02N3A02 1/8 2 30 NBR SS316
SMP1MF02N3AC3 1/8 2.5 30 NBR SS316
SMP1MF02N3A03 1/8 3 30 NBR SS316
SMP1MF02N3A05 1/8 5 13 NBR SS316
SMP1MF02N3A06 1/8 6 9 NBR SS316
SMP1MF02N3B03 1/4 3 30 NBR SS316
SMP1MF02N3B05 1/4 5 13 NBR SS316
SMP1MF02N3B06 1/4 6 9 NBR SS316
SMP1MF02N3C03 3/8 3 30 NBR SS316
SMP1MF02N3C04 3/8 4 25 NBR SS316

Hot Melt Adhesive For Garment And Shoe

Hot melt adhesive for shoes refers to a general term for a class of hot melt adhesive products used in the field of shoe processing, which is not a single model of hot melt adhesive film products. Due to the diversity of shoe-making materials, there are many types of hot melt adhesives used in the field of shoe materials. To make a simple summary, the common types of tpu hot melt film with low temperature release film, and the types of pa and tpu hot melt omens.

So, what are the characteristics of using hot melt adhesive as a adhesive for shoe materials compared with traditional white glue and yellow glue? The characteristics of hot melt adhesive for shoes compared with traditional shoe adhesive are mainly in the following aspects:

1, more environmentally friendly than traditional adhesives, both for the production of operators, or consumers are more healthy;

2, better air permeability: especially for shoes with high air permeability requirements, the air permeability of hot melt adhesive will be better than traditional adhesives;

3, better bonding strength: from the perspective of the composite effect, the bonding strength of hot melt adhesive is better than that of traditional glue;

4, from the production point of view: hot melt adhesive is easy to continuous operation, can greatly increase the production efficiency of the enterprise.

Hot Melt Adhesive For Garment And Shoe,Hot Melt Adhesive For Hat,Hot Melt Adhesive For Clothing,Non Slip Sock Hot Melt Glue

Shenzhen Tongde New Materials Technology Co., Ltd. , https://www.tdhotmeltglue.com