Sheet metal processing equipment practice
Introduction: The gold refers to a processing process that requires a lot of processes and has been widely used in electronic and electrical appliances, communications, automobile industry, medical equipment and other fields. é’£ gold refers to a processing process, and its processing procedures generally have the following types:
Jack hammers are tools that are used to directly exploit rocks. They drill blast holes in rock stratums in order to allow explosives to blast the rocks, thus completing the quarrying of stone or other stone works in addition, jack hammer can also be played as breaker, used to crush hard layers such as concrete. Their weights are light, usually about 25kg, working with hand-held operation. A variety of small diameter and shallow holes can be made. Jack hammer generally only punch downward or nearly horizontal holes.
Jack Hammer,Pneumatic Pick Jack Hammer,Electric Jack Hammer,Gasoline Jack Hammer,Hand Held Jack Hammer,Portable Jack Hammer,Pneumatic Hammer Quzhou Able Machinery Equipment CO., LTD. , https://www.able-machine.com
For general parts: blanking, punching, bending, trimming, shaping, blanking, cleaning, welding, surface treatment, etc.
For complex parts: stretching, shaping, peeling, punching, sidecutting, blanking, cleaning, welding, surface treatment, etc.
Each industry has its own terminology, and the sheet metal processing industry is no exception.
Rising riveting: refers to the process of sinking the workpiece first, and then pressing the rising rivet nut firmly on the workpiece with a press or hydraulic press.
Pull mother: refers to the use of similar riveting process. The process of firmly connecting the POP and other connectors to the workpiece with the puller.
Cut angle: Refers to the process of cutting off the corner of a workpiece using a die on a press or hydraulic press.
Bending: Refers to the process of forming a workpiece by a bending machine.
Forming: Refers to the process of using a mold to deform a workpiece on an ordinary press or other equipment.
Cutting material: refers to the material through the shears to obtain a rectangular workpiece process.
Cutting: refers to the process of the workpiece after LASER cutting or CNC punching.
Blanking: Refers to the process of using a mold to obtain the shape of a product on an ordinary punch or other equipment.
Punching: Refers to the process of machining workpieces from ordinary punches and dies.
Punching convex bag: Refers to the process of forming a convex shape of a workpiece in a punch or a press die.
Leveling: Refers to the unevenness of the workpiece before and after machining, and the use of other equipment for the smoothing of the workpiece.
Chamfering: Refers to the use of molds, boring tools, grinding machines, etc. to process the sharp corners of the workpiece.
Punching mesh hole: refers to punching the mesh hole in the workpiece with a common punch or a numerically controlled punching bed.