TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse

Model NO.: TIG 200P AC/DC
Trademark: GUBANG
Transport Package: Carton
Specification: 500*335*315
Origin: China
HS Code: 851539000
Model NO.: TIG 200P AC/DC
Trademark: GUBANG
Transport Package: Carton
Specification: 500*335*315
Origin: China
HS Code: 851539000
Performance and Features:                                               
  1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
  2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.
  3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
  4. Has connector to foot control, convenient for workers's operation.
  5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
  6. High duty cycle, may work continuously with high current.
  7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.






Parameter/Specification
 
Model
Item      
TIG 200P AC/DC
Voltage(V) AC220V ±15%
Frequency(Hz) 50-60
Input Power(KVA) 5.8
No-load Voltage(V) 56
Current Range(A) 10-200
Rated Duty Cycle 60%
Applied Welding Rod(mm) ¢1.6-4.0
Pre-flow time(S) 2
Post-flow time(S) 0-10
Down slope(S) 0-10
AC Balance(%) 20-80
AC Frequency(Hz) 60
Pulse Frequency(Hz) 0.5-300
Power Factor 0.73
Efficiency(%) 85
Insulation Grade F
Housing Protection Grade IP21S
Weight(Kg) 20
(L*W*H)(mm) 500*335*315
Carton CBM(m3) 0.115
Specification
 Capacitor 470uF/400V*4
MOSFET 23N50E*12
Output Rectifier D92-02*12





                 FRONT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






                  ACCESSORY

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse





                     LEFT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






                        RIGHT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse







                      TOP VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






       BACK VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse
  Performance and Features:                                               
  1. Upgrade square wave power source, current with high speed through the zero, arc is stable no high frequency stabilizer is necessary.
  2. Good arc stiffness, heat concentrated, easy to fill wire, is especially suitable for filller wire welding in bicycle industry.
  3. Super oxide film clean capability, clean time is adjustable steplessly, beautiful and bright welded seam.
  4. Has connector to foot control, convenient for workers's operation.
  5. Built in over current, over heat, over voltage, low voltage alarm and protection circuit, safe and reliable when operating.
  6. High duty cycle, may work continuously with high current.
  7. Suitable for welding aluminum and its alloy, carbon steel, stainless steel, copper, titanium etc.






Parameter/Specification
 
Model
Item      
TIG 200P AC/DC
Voltage(V) AC220V ±15%
Frequency(Hz) 50-60
Input Power(KVA) 5.8
No-load Voltage(V) 56
Current Range(A) 10-200
Rated Duty Cycle 60%
Applied Welding Rod(mm) ¢1.6-4.0
Pre-flow time(S) 2
Post-flow time(S) 0-10
Down slope(S) 0-10
AC Balance(%) 20-80
AC Frequency(Hz) 60
Pulse Frequency(Hz) 0.5-300
Power Factor 0.73
Efficiency(%) 85
Insulation Grade F
Housing Protection Grade IP21S
Weight(Kg) 20
(L*W*H)(mm) 500*335*315
Carton CBM(m3) 0.115
Specification
 Capacitor 470uF/400V*4
MOSFET 23N50E*12
Output Rectifier D92-02*12





                 FRONT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






                  ACCESSORY

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse





                     LEFT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






                        RIGHT VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse







                      TOP VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse






       BACK VIEW

TIG 200p AC/DC Inverter TIG Welding Machine with AC/DC Pulse
 

Brochure Holder Display

1. Size: Brochure Holder displays can range in size from small countertop models to large floor-standing displays. The size of the holder will depend on the number and size of brochures to be displayed.
2. Material: Brochure holder displays can be made from various materials such as acrylic, plastic, metal, wood, or cardboard. The choice of material will depend on the intended use, durability, and aesthetics.
3. Capacity: Brochure holder displays can hold a varying number of brochures, depending on the size of the holder and the thickness of the brochures. Some holders can hold up to 50 or more brochures.
4. Orientation: Brochure holder displays can be designed to hold brochures in either a vertical or horizontal orientation. The orientation will depend on the size and shape of the brochures.
5. Placement: Brochure holder displays can be placed on countertops, tables, walls, or floors. The placement will depend on the intended use and visibility.
6. Features: Some brochure holder displays may have additional features such as adjustable pockets, rotating bases, or locking mechanisms for added security.
7. Branding: Brochure holder displays can be customized with branding or graphics to promote a specific product or service. This can be done through printing, engraving, or adding decals.

Brochure Holder Display,Brochure Display A4 Holder,Portable Display Stand A4,Folding Trial Display Rack,Portable Display Stand A4,Company Display Rack

SUZHOU JH DISPLAY&EXHIBITION EQUIPMENT CO.,LTD , https://www.jh-popup.com