Hoist optimization measures
Special steel wire tape is required for the large height hoist. The specially designed high-strength steel wire tape is used as the traction member, which is completely different from the traditional steel wire tape in terms of thickness, wire density, warp and weft arrangement, wire thickness, etc., not only has higher strength, but also has better flexibility, and rubber and steel wire rope. Good adhesion between the two. The special tape produced by special formula and unique processing technology has the characteristics of low elongation, tear resistance, stable operation and long service life. Optimized head wheel design with high wear-resistant vulcanizing head wheel and sweeping device to alleviate the failure of automatic correcting function due to adhesive. The drive shaft is supported by self-aligning roller bearings, and the bearing housing is dust-proof. The surface of the steel structure drive wheel is vulcanized with high wear-resistant rubber. It is processed into a special arc with automatic self-aligning function through a large CNC lathe, and then ground to enhance the between the head rubber and the tape. Friction. The shaft hole of the head wheel end face is turned by a 50-60mm steel plate and then ground to ensure the expansion joint between the expansion ring of the head wheel and the head shaft. The improved powerful parallel four-bar linkage tensioning mechanism is used for anti-corrosion treatment. The self-balancing automatic tensioning design is adopted to make the end faces of the tail wheel synchronously move through the powerful parallel four-bar linkage mechanism, and the tail wheel is always slidable in parallel with the tape. With precision machined cage tail wheels, automatic tensioning and self-correcting are ensured. The utility model is characterized in that the tensioning stroke is increased, and the tape elongation of the ultra-high hoist is adapted, and the belt clip processing solution is reserved, and the tail screw of the machine increases the sealing. (Finish) Equipment Gasket ,Stainless Steel Gaskets,Gasket For Various Equipment,Non-Standard Shims Of Various Ningbo Metal Sharing Supply Chain Management Co., Ltd , https://www.nbsteelsupply.com