MB 15AK MIG/MAG Welding Torch of Contact Tip and Nozzle

July 12, 2024

Model NO.: MB 15AK MIG Welding Torch of Contact Tip& Nozzle
HS Code: 85153900

NOZZLE 15AK

SIZE
Description

TFM 145.0075
Conical Nozzle Φ12mm

TFM145.0041
Cylindrical Nozzle Φ16mm

TFM145.0123
 Tapered Nozzle Φ9.5mm

TFM145.0168
Spot Weld;Gas Nozzle NDΦ16MM

 
 
Welding Nozzle for welding torches :
1.BINZEL 15AK Welding Nozzle
2.Accessory of welding torches.
3.Different series and  specifications  of welding  nozzle are available in our company
 
4.We produce many kinds of MIG/ MAG welding torches and all related welding accessories.
    Bernard:200E,300E 400E and 600E;
    Panasonic: 180A, 350A and 500A  ; 
    Binzel: MB-15AK, 24KD, 25AK, 26KD, 36KD, 40KD and 501D ;
    Tweco: 1#, 2# , 3#, 4# and 5#
    OTC :200A, 300A, 350A and 500A;  Miller  world famous brands etc. 
  Including  complete torch, nozzle, contact tip,  tip holder, gas diffuser swan neck, insulator ,steel liner, rear handle, cable........
 
5, TIG welding gun and spare parts, such as WP-9, WP-12, WP-17, WP-18, WP-20, WP-24, WP-25, WP-26, WP-27 air cooled and water cooled etc.
   Including torch head, back cap, cup gasket, collet, collet body, gas lens body, cable fittings,alumina nozzle, power carble adapters, switch, torch body.
 
6. Different kinds of electrode holder, earth clamp/ground clamp , carbon electrodes, Tungsten electrodes.
 
7. Welding wire for CO2 gas shielded welding (AWS ER70S-6), solder wire for submerged arc welding (AWS EM12K, AWS EH14, AWS EM13K), solder wire for stainless steel (AWS ER308, ER308L, ER309, ER316, ER316L etc)

Electronic Automatic Speed Controller

The speed regulator is a professional design of the regulating board, which includes all aspects of self leveling. It is mainly used to automatically adjust the controlled parameters of the system composed of pressure, tension, speed, temperature and other parameters.

All important current can be controlled by a single external resistor. The simple motor start and stop can be set. The starting timing sequence can be completed by two capacitors by using the power supply of the circuit. The peripheral circuit simply adopts the new reverse potential commutation technology, It can provide the minimum torque without jitter, and control the maximum efficiency. It has reversing PLC, which can effectively suppress the PWM peak noise signal

Electronic Automatic Speed Controller,Engine Speed Governor,Generator Speed Control Unit,Dc Speed Electric Motor Controller

Glove Industry Co.,Ltd. , https://www.glovemech.com