The engine is installed as a reference to ensure that the engine is properly connected to the torque converter
In the engine positioning and connection field modification, the connection between the engine and the drive system should be determined first to ensure the correct fixing of the engine. In order to ensure the correct fixing of the engine, it is necessary to ensure that the rebuilt engine is aligned with or parallel to the crankshaft centerline of the original engine and use this as a reference for the installation of the engine, so as to ensure the correct connection between the engine and the torque converter. When the engine is refitted and tested, it is possible to observe the "dummy image" of the rotation of the drive shaft. With proper positioning, the drive shaft can be rotated along the axis without any imaginary shadows. If an imaginary shadow is generated, the positioning of the engine should be adjusted. After the engine is positioned, the intake and exhaust system, fuel system, cooling system installation and gas circuit and circuit modification should be performed. In the modification of these systems, special attention should be paid to: In the installation process of the air intake system, special attention should be paid to the seal of the connection between the air intake of the engine and the outlet of the air filter to prevent dust from entering due to the looseness of the connection, thus causing the early stage of the engine. Wear; In the installation of the cooling system, the ratio of the fan speed of the NT855-C310 to the crankshaft speed is 1:2, the ratio of the speed of the fan of the S6D140-1 to the crankshaft speed is 1:1, but the fan of the NT855-C310 The diameter of the leaves is 34 in which is smaller than the fan leaf diameter of the S6D140-1. Car Door Central Lock,Central Door Controller,Car Central Lock Actuator,Car Central Locking System WENZHOU TIQNIU ELECTRICAL CO.,LTD. , https://www.tianqiuelectrical.com