What to pay attention to when opening the scale scale body
Indoor Edging Beauty Silicone Sealant Indoor edging beauty silicone sealant, Indoor edging beauty silicone sealant, Edging beauty silicone sealant Shandong Gufeng Technology Co., LTD. , https://www.gfkjgs.com
The scales are opened and the whole process is listed as follows:
The first step is to first loosen the signal line of each load cell of the weighing scale from the junction box and record the response. In the future, the device should be installed on the original position of the junction box. The signal line must not be cut off. Then the main line is also closed.
The second step: disassemble the connecting screws between the two scale bodies, there are longitudinal and transverse.
The third step: pick up the steel balls under the scale body, steel balls and steel pads and respond to thin iron gaskets.
In the process of lifting and transportation, pay attention to the sensor signal line with a good response to prevent crushing and pressure breaking. The load cell should be prevented from chaos during the disassembly and lifting process. 
Do a good job in the above steps, the task of dismantling the ground scales is considered to pass the completion of the task, can not save the map, save the sensor signal line full shear, and other improper handling, if such disposal will bring about for the future use of weighing Big trouble. As soon as it rains, the junction of the signal line will go wrong if it enters the water.