In the video surveillance project, it is necessary to consider the power supply mode of the camera. What power supply method can achieve the best monitoring effect? How to save the engineering cost to the greatest extent? First of all, we need to understand several ways of powering the camera in the video surveillance project.
First, centralized power supply
Centralized power supply refers to the way in which the source devices are centrally installed in the power room and the battery room, and power is supplied to the communication devices after unified distribution.
Centralized power supply: Connect a 12V centralized power supply to a 220V power supply, and then connect the 2*1.0 red and black power cables to the camera. The 12V power supply distance must not exceed 100 meters. After connecting a single power cable connector, connect a single power cable connector and surveillance camera power connector. The centralized power supply mode refers to centralized power supply to the front-end load using a 12V switching power supply in the monitoring room or an intermediate point.
The role of centralized monitoring
The management objects of the data center mainly include two major parts of infrastructure and IT infrastructure, such as power distribution, network equipment, security, etc. The purpose of centralized monitoring is to be able to run infrastructure and IT infrastructure through the application of management and technology. Monitor the situation to realize the real-time discovery and notification of faults and abnormalities. In addition, it can also collect and organize monitoring data to provide the basis for analysis of capacity management, event management, problem management, and compliance management, and ultimately achieve high availability of data centers. aims.
Advantages: More convenient construction, easy maintenance, unified control and management.
Disadvantages: The pre-configuration is complicated, and the DC low-voltage power transmission distance is too long and the voltage loss is high, and the anti-interference ability in the transmission process is poor.
Second, point to point power supply
Point-to-point power supply: refers to direct 220V AC power from the monitoring room, a separate DC12V power supply next to the camera, and then connected to the surveillance camera.
Advantages: 220V AC voltage loss during transmission, strong anti-interference ability.
Disadvantages: Each point must be installed a power supply, construction is more troublesome.
Third, PoE power supply
PoE power supply refers to the technology of providing DC power for other devices without any changes in the existing Ethernet Cat.5 cabling infrastructure. This method is mainly applied to high-definition network digital surveillance systems.
Advantages: Lower cost, flexible deployment, convenient and fast, beautiful and beautiful, single port maximum power up to 30W.
Disadvantages: The quality of the network cable is high, the transmission distance is limited, and the power of the powered device cannot exceed 30W.
Precautions
1, When using infrared cameras, centralized power supply is not recommended. Because the current is large when the infrared is turned on, it is difficult to ensure the infrared effect of all cameras by the centralized power supply mode.
2, point to point power supply, nearest access to electricity, can save lines, is a big savings, but after-sales maintenance, extremely difficult to maintain; this is positive, centralized power supply has a benefit, after the maintenance is simple, not easy to issue, But if you don't want to overshoot the wire, if you're done, you'll be able to use the point-to-point power supply. This is a long-term use of centralized power supply.
3, if the outlet is more than one, the nearest power supply can be used separately. If there is not much, it can be concentrated. If it is indoors, you can use the sheathed power cable.
4, When the number of cameras is relatively large, and the power supply distance does not exceed 100 meters, it is recommended to use PoE power supply, without special construction, convenient and quick, but pay attention to the choice of PoE power supply equipment.
ABS CLOSET FLANGE
Our ABS Closet Flange is a must-have component for any plumbing system, specifically designed to provide a secure and reliable connection between the toilet and the sewer pipe. Made from high-quality Acrylonitrile Butadiene Styrene (ABS), this flange offers exceptional durability, chemical resistance, and long-lasting performance.
The ABS material used in our closet flange ensures it can withstand heavy usage, high pressure, and extreme temperatures without compromising its structural integrity. It is highly resistant to corrosion, making it suitable for both residential and commercial applications.
Installation is quick and straightforward. The ABS Closet Flange features an innovative design that allows for easy attachment to the floor, ensuring a stable and secure connection. Its adjustable height feature accommodates different floor thicknesses, providing flexibility during installation.
Our ABS Closet Flange is compatible with standard-size toilets and sewer pipes, making it a versatile option for various plumbing projects. It creates a watertight seal, preventing any leaks and minimizing the risk of unpleasant odors in the bathroom.
With its superior strength, chemical resistance, and ease of installation, our ABS Closet Flange is the ideal choice for plumbers, contractors, and homeowners alike. Trust in the quality and reliability of our product to ensure a long-lasting and efficient plumbing system.
Upgrade your toilet installation today with our ABS Closet Flange. Experience peace of mind knowing that you have a top-quality, reliable connection that will withstand the test of time. Choose our ABS Closet Flange and enjoy years of trouble-free performance and comfort in your bathroom.
Abs Closet Flange,Abs Closet Flanges,Black Abs Closet Flange,Plastic Abs Closet Flange
SUPERY ABS PIPE FITTING CO.,LTD , https://www.dbrfittings.com
