Delphi Mexico Adds 3,000 Jobs to Build New Plant
According to the Wall Street Journal, Delphi currently invests 300 million Mexican pesos (22.71 million U.S. dollars) in the construction of an electronic wire harness factory in Mexico. The Mexican government stated that Delphi had invested 300 million Mexican pesos in the northern part of Durango State on August 15 to construct a new phase of the new plant. Felipe Calderon, president of Mexico, said that the construction of the first phase of the Delphi new plant will create more than 3,000 direct jobs, and that the second phase of the new plant will create more jobs. Calder said that the recent car companies investing in Mexico led Mexico to become the world’s fourth-largest car exporter in the second quarter of 2012, and in 2006 Mexico ranked ninth among the world’s car exporters. The fluidized bed dryer puts fluid materials such as powders, pastes (or even suspensions and solutions) on a perforated plate and other air distribution plates, and sends them into a drying medium with a considerable speed from the lower part. When the flow rate of the medium is low, the gas flows between the material particles, and the entire material layer does not move; gradually increase the gas flow speed, the material layer begins to expand, and the gap between the particles increases; then increase the gas flow speed, and a considerable part of the material is suspended. , Forming a gas-solid mixed bed, that is, a fluidized bed, because the suspended material in the fluidized bed is like a boiling liquid, it is also called a fluidized bed, and it presents fluid properties in many aspects. Therefore, the air flow speed is the most fundamental control factor of the fluidized bed dryer, and the appropriate air flow speed should be between making the material layer begin to fluidize and bringing the material out. Fluid Bed,Fluidized Bed Dryer,Fluid Dryer,Fluid Dry Bed Griffin Technology Manufacturing Co., Ltd. , https://www.griffindryingeqpt.com