US Department of Energy plans to adjust LED lighting facts guidelines
304 Stainless Steel Cut Wire Shot
Longlived 304 stainless steel Cut Wire Shot are all produced through German craftsmanship with bright, defect-free and pollution-free material. After strict processing like heat treating, wire drawing, electronic spiral cutting, passivation molding and other processes, our products are strictly in a accordance with German Spring Association standard VDFI8001, German industrial standards DIN8201 and American Aerospace Material Specification Standard. It is widely used for surface shot blasting, sand blasting and shot blasting of stainless steel parts, aluminum alloy die castings, and copper alloy parts. According to different composition, stainless steel is classfied several grades such as 304, 410, 430, 201 and 304 stainless steel cut wire shot is the most popular abrasive of them as its excellent performance. The composition of 304 stainless steeel is: C≤0.07, Cr 17.00-19.00, Ni 8.00-10.00, Mn ≤2, P≤0.035, S≤0.030, Si≤1.00. So you can check if 304 Stainless Steel Shot could meet your requirement.
304 Stainless Steel Cut Wire Shot,304 Cut Wire Stainless Steel Shot,Deburring Stainless Steel Cut Wire Shot,Stainless Steel Rounded Shot Longlived Metal Products Co ., Ltd , https://www.tzlonglivedmetal.com
The US Department of Energy LED team is currently developing a new set of LED lighting facts that describe the performance characteristics of standard LEDs to help consumers and designers clearly distinguish between traditional and LED luminaires. In order to improve the reliability of the data on the factual label of LED lighting, the Ministry of Energy hopes to retest the product. But in the end, in order to avoid the expensive test costs of semiconductor lighting manufacturers, it was decided to delay the publication of new regulations.
Previously, at the Semiconductor Lighting Market Symposium in Pittsburgh, USA, the Department of Energy’s guidelines for adjusting LED lighting facts were discussed. The adjustments include retesting any modified luminaires in one year and sampling certain products from time to time to maintain product quality. (The manufacturer will bear the cost of these inspections.) However, the industry's response to retesting semiconductor lighting fixtures is too expensive, so the Department of Energy will reconsider the details of the adjustments and identify other data that can reduce test costs and increase LED product data. An alternative to reliability.
The Department of Energy also said that LED lighting facts will be combined with semiconductor lighting performance testing. Both tests will maintain the original functionality, but the data will be combined into a single portal for individual product evaluation.
The US Department of Energy's LED standards provide convenience for consumers and designers in the United States. China is now in short supply of LED lighting products related standards, and consumers do not have a good reference standard to choose LED lamps, which has adversely affected the development of China's LED industry. Therefore, China has also promoted the development of the LED industry by formulating relevant standards as soon as possible.