Maintenance of flatbed trucks, XCMG Chu Sheng teach you five maintenance tips
Flat Transporter Five Maintenance Coup First, inspection of brake system of flatbed truck When the flatbed truck was driving on a gravel road, some small sandstones stuck between the brake discs and the fenders, constantly rubbing the surface of the brake discs, so grooves appeared. When this happens, the vehicle may make a "when it's awkward, it's awkward" sound when walking, and in some cases it will still hear screams. In view of this situation, we can visually inspect the surface of the brake disc through tire aluminum alloy steel rings. If the surface of the brake disc is smooth, it is normal. Second, appearance and paint inspection of flatbed truck The appearance mentioned here includes the surface of the flatbed truck and all the parts that you can see. Due to occasional high-speed driving, it is inevitable that there will be bumps on the pebbles on the road surface, causing damage to the paintwork. Once the car is set aside, no one will inevitably feel bad. The method of inspection at this time is to thoroughly rinse the vehicle, and then wrap the vehicle around it for two rounds, and carefully observe whether the paint surface has scratches and other components. Third, flatbed truck tire inspection After long-distance driving, some flat transporter's wheels will show obvious signs of injury, excessive wear or "trauma". At this time, depending on the specific circumstances, you may choose to replace the spare tire and go to the 4S shop for further inspection. In addition, after a long bump, the positioning of the tire may fail, and the most significant feature at this time is that the vehicle will experience vehicle deviation and beating. If this happens, it will also need to go to the 4S shop for inspection. Fourth, the flatbed truck engine oil inspection Generally speaking, the lack of oil after a long-distance driving of a flatbed transporter is a relatively common phenomenon. If you forget the previous marking of oil, you should not blindly add new oil, because the mixed use of different marking oils may cause adverse consequences. Experts said that the correct approach is to clarify the original oil label and then select the same label to add. If your maintenance period is approaching, then simply replace the original engine oil and add new engine oil. Fifth, inspection of internal components of flatbed trucks After a long journey, a component in the engine compartment of the flatbed truck needs to be checked. It is the “air filterâ€. If you are on the way more dust than in the city, then the air filter may adsorb excessive dust during this time, and if the dust enters the engine will cause the wear of various parts of the engine; such as the air filter is blocked It will cause the engine to feed poorly and the power will drop. So remove the air filter and check it is necessary. Abs Promotion Counter Round,Half Round Counter,Promotion Round Table,Promotion Table Box SUZHOU JH DISPLAY&EXHIBITION EQUIPMENT CO.,LTD , https://www.jh-posterstand.com