On May 30, 2013, Sany Heavy Industry's A8 mortar master set up its first benchmarking station in Wenzhou, Zhejiang Province, and was put into production. This is the world's first mobile mortar complete set launched by Sany integration with Germany's cutting-edge technology, and created a new construction model for ready-mixed mortar. Wet-mixed mortar has a landmark in the field of mortar construction. Assistant President of Sany Heavy Industry, Deputy General Manager of Pumping Division Marketing Company Li Liowen, Chief Marketing Officer of Putzmeister Asia, He Faliang, Assistant President of Sanyi Group, Chairman of Jiangsu Sanyi Engineering Equipment Co., Ltd. Tang Fuyi, III A heavy industry Zhejiang agent chairman Yin Yin, and more than 400 customers from across the country attended the production ceremony, and on-site observation of the first set of A8 mortar master station construction. A8 mortar masters have not only achieved breakthroughs in mortar manufacturing technology, but also achieved major innovations in mortar mixing, transportation, and spraying technologies, providing customers with complete solutions throughout the entire process.
Sino-German Science and Technology Solve Problems and Realize Major Innovations in Mortar Industry
In 1958, Mr. Karl Schleit, the founder of Putzmeister, developed a mortar machine and humanity began to enter the era of mortar mechanization. This was a major event that was equivalent to the industrial revolution. Putzmeister was thus crowned with The "master mortar machine" reputation. At present, Europe and the United States have basically achieved the construction of mortar mechanization. In Europe and America, the construction site of any concrete building can basically see the appearance of a mortar machine.
Speech by He Faliang, Chief Marketing Officer, Putzmeister Asia Pacific
But after the mortar machine entered China, it failed to replicate its success in Europe and the United States. The reason is that the construction standards in Europe and the United States are very strict. The size of mortar used for painting on walls must be ≤ 2.5 mm, and the particle size should be smaller. The difficulty of pumping and putting on walls is much smaller. However, China's building standards require that the size of the mortar on the wall be ≤ 5mm, which may be even greater in many places. The cost of raw materials for mortar to reach European and American standards is too high, and many contractors prefer to use manual construction. In response, He Faliang believes that “the rapid development of urbanization in China, the continuous increase in labor costs, and the country’s environmental protection requirements for mortar construction have provided an opportunity for the birth of SANY A8 mortar masters, making it a revolution in the mortar construction industry. Sex products."
On May 30, 2013, Sany Heavy Industry's A8 mortar master set up its first benchmarking station in Wenzhou, Zhejiang Province, and was put into production. This is the world's first mobile mortar complete set launched by Sany integration with Germany's cutting-edge technology, and created a new construction model for ready-mixed mortar. Wet-mixed mortar has a landmark in the field of mortar construction. Assistant President of Sany Heavy Industry, Deputy General Manager of Pumping Division Marketing Company Li Liowen, Chief Marketing Officer of Putzmeister Asia, He Faliang, Assistant President of Sanyi Group, Chairman of Jiangsu Sanyi Engineering Equipment Co., Ltd. Tang Fuyi, III A heavy industry Zhejiang agent chairman Yin Yin, and more than 400 customers from across the country attended the production ceremony, and on-site observation of the first set of A8 mortar master station construction. A8 mortar masters have not only achieved breakthroughs in mortar manufacturing technology, but also achieved major innovations in mortar mixing, transportation, and spraying technologies, providing customers with complete solutions throughout the entire process.
Sino-German Science and Technology Solve Problems and Realize Major Innovations in Mortar Industry
In 1958, Mr. Karl Schleit, the founder of Putzmeister, developed a mortar machine and humanity began to enter the era of mortar mechanization. This was a major event that was equivalent to the industrial revolution. Putzmeister was thus crowned with The "master mortar machine" reputation. At present, Europe and the United States have basically achieved the construction of mortar mechanization. In Europe and America, the construction site of any concrete building can basically see the appearance of a mortar machine.
Speech by He Faliang, Chief Marketing Officer, Putzmeister Asia Pacific
But after the mortar machine entered China, it failed to replicate its success in Europe and the United States. The reason is that the construction standards in Europe and the United States are very strict. The size of mortar used for painting on walls must be ≤ 2.5 mm, and the particle size should be smaller. The difficulty of pumping and putting on walls is much smaller. However, China's building standards require that the size of the mortar on the wall be ≤ 5mm, which may be even greater in many places. The cost of raw materials for mortar to reach European and American standards is too high, and many contractors prefer to use manual construction. In response, He Faliang believes that “the rapid development of urbanization in China, the continuous increase in labor costs, and the country’s environmental protection requirements for mortar construction have provided an opportunity for the birth of SANY A8 mortar masters, making it a revolution in the mortar construction industry. Sex products."
Sany Heavy Industry A8 mortar master model station awarded
Dry-mixed mortar complete sets of equipment is the earliest successfully developed ready-mixed mortar construction equipment, and is currently the mainstream ready-mixed mortar construction equipment on the market. It effectively solves the problems of low efficiency and large pollution in the traditional manpower model. However, in the actual promotion, there are a series of problems such as high total cost and huge energy consumption. These problems have constrained the reform and development of the mortar industry.
The China Bulk Cement Promotion and Development Association issued a certificate for the Sany A8 mortar masters
"As a leader in the industry, Sany has been pondering and exploring the above issues for many times. We have been seeking a reasonable solution to make our due contributions to China's mortar industry." Indicated. Sany has been committed to the research and development of ready-mixed mortar equipment. Its research and development of dry-mixed mortar complete sets of equipment enjoy a high reputation in the market, but Sany knows the bottleneck of dry-mixed mortar complete sets of equipment and carries out energy consumption issues. A lot of in-depth research.
Customers from all over the country to observe the construction of the Master A1 mortar master
At the meeting, Ding Jianyi, executive vice chairman and secretary-general of the China Bulk Cement Promotion and Development Association, sent a congratulatory message for the construction of the Trinity A8 mortar master pole station. He pointed out that the Chinese dry-mixed mortar has problems in the spraying operation and reliability. It is easy to produce segregation during transportation, resulting in insufficient agitation, so the market space for China's commercial mortar has not been opened. In the end, the scientists of Sanyi and Putzmeister realized a comprehensive breakthrough in improving construction efficiency, lowering construction costs, and improving construction quality. They also conquered the industrial problems of mortar on the wall and A8 mortar masters came into being. Ding Jianyi said: "The birth of it will surely play a positive role in accelerating the development of the ready-mixed mortar industry in China."
Clients to observe the construction of Trinity A8 mortar master
Market prospects for ready-mixed mortar market are promising. <br> For a long time, the domestic mortar construction mainly uses artificial field mixing mode, and its disadvantages such as low efficiency and serious pollution are increasingly prominent, and the situation is repeatedly prohibitive. Since 2007, the Ministry of Commerce, the Ministry of Housing and Construction, the General Office of the State Council and other departments have successively issued a series of policies that prohibit manual site mixing on the site. In addition, with the increasingly scarce labor force, the demographic dividend has disappeared, and the cost advantage of the labor-intensive mortar industry no longer exists, which will prompt the transition of the mortar industry toward mechanized construction.
Customer site to observe the Tri-A8 mortar master spraying mortar
In the past, the mortar industry basically used manual construction, production methods were extensive, there were many problems such as workers' labor intensity, low construction efficiency, many construction site pollution, and unqualified mortar quality. To achieve the overall industrial upgrading of the mortar industry, these problems must be effectively resolved. In the future, China's mortar industry is likely to create the equivalent of the concrete industry, and even exceed the huge demand and market space of the concrete industry. During the “Eleventh Five-Year Plan†period, China produced a total of 3.5 billion m3 of ready-mixed concrete, with an annual growth rate of 25%. According to authoritative forecasts, the market capacity of China's mortar industry exceeds 500 million tons, and the output value is more than 200 billion yuan. The ready-mixed mortar equipment market will become a fast-growing market in the next few years.
The construction site to observe win customers high praise
Zhejiang Pingyang Xingxing Concrete Co., Ltd., which has maintained good cooperation with Sany, built the first set of benchmarking stations for the Trinity A8 mortar masters. At the construction site, customers from all over the country truly experienced the outstanding performance of A8 mortar masters. The customer from Shanghai stated: “Sany has integrated the cutting-edge scientific and technological achievements of Putzmeister in Germany, and brought A8 mortar masters to our customers. It not only inherited the advantages of 'high-efficiency and environmental protection' of dry-mix mortar equipment, but also overcomes The latter is in short of cost, energy consumption, etc. I am confident in the future of the Trinity A8 mortar master!"
Sino-German singers jointly perform Jasmine
During the event, the China Bulk Cement Promotion and Development Association issued a certificate for the Trinity A8 mortar masters and highly recognized their performance. The wonderful arts and events arranged on the spot have brought a wonderful audio-visual feast to the national customers. In particular, "Jasmine" jointly performed by the Sino-German singers is closely linked with Sany and Putzmeister, indicating a better future for both parties.
It is understood that as of the end of May, many sets of A8 mortar masters have been built successively throughout the country. A8 mortar master not only fully mechanized screen sand, stirring, transportation and spraying, but also achieved a complete breakthrough in improving construction efficiency, reducing construction costs, and improving construction quality, providing customers with a complete solution throughout the entire process. With the A8 mortar masters completed and put into operation throughout the country, the mortar equipment industry will enter a new stage of development.
Related news: Trinity mortar A8
Copyright Notice:
This article is China Engineering Machinery Business Network () original, if you need to reprint must be in the form of hyperlinks to indicate the source, is strictly prohibited from any changes in the original text.
Foil For Surfboard Sup,Carbon Fiber Hydrofoil,Hydrofoil Carbon Foil,Carbon Hydrofoil Surfboard,Carbon Hydrofoil Board,Hydrofoil Surfboard Foils
