The correct use of seat belts

Every day you drive, you are concerned about the safety belt that has been with you all the time. Although one of the things you must do every day on the car is to wear a seatbelt, but are you doing it right?

Many people do not pay attention to the problem of how to tie the seat belt correctly. Even some people will never wear a seat belt when driving. In fact, this is a very terrible thing. From the data point of view, the correct seatbelt can be caused

Can 45% of life be saved in a life-threatening accident, but what do you say more about it?

Correctly fasten the seat belt first step - adjust sitting posture

1. The distance between the person and the steering wheel: Stretch out his hands and place the two hands on the steering wheel. This is the most suitable distance.

2. The degree of leg bending: The legs are bent about 90 degrees, so that if the emergency brake, the leg more flexible response. When a crash occurs, it also ensures sufficient cushioning of the legs to avoid cross-sections and

The upper body is hurt.

3. Position of both hands on the steering wheel: Position both hands at 9 o'clock and 3 o'clock approximately horizontally to help control the vehicle effectively in an emergency.

Correctly fasten your seat belts - Adjust your seat belts

1. Hold the buckle lock and tongue

2. Slowly pull out the lumbar shoulder harness

3. Make sure the shoulder belt is crossed from the shoulder and close to the neck, and it is comfortable and close to the body

4. Ensure that the waist belt is below the abdomen and as low as possible, also fitting to the body

5. Insert the seat belt buckle into the buckle until you hear the kata sound.

Tips: The correct steps for pregnant women to wear seat belts:

1. The waist belt avoids the uplift position and is placed at the lowest position of the sacrum, which is the junction of the protruding parts of both sacrum and the pubis. It is best to tie your thighs. Do not let the belt cross over the raised belly.

2. The shoulder strap should also avoid the bulging tummy, from the side of the head through the breasts to the side of the abdomen. Do not allow the straps to cross the stomach, and be careful that the side of the head may rub against the neck.

3. Adjust the position of the seat when driving, so that there is a certain space between the stomach and the steering wheel.

4. Adjust the tilt of the seat so that the seat belt is always attached to the body.




Gear Box Reducer

Usage: Semi automatic Washing Machine; Twin tub Washing Machine; Other electrical appliances need to adjust the matching speed according to the gear.

Drive Type: Motor drive belt

Delivery Detail: 25 days after T/T in advance; other payment methods needs to be discussed

Pulley size and shaft by Customized

Material

Cover use PP with 25% glass fiber

Shaft use Stainless steel

Gear use POM

Oil seal gasket and Hydroseal both use NBR

Product Description

1.washing machine gearbox outer appearance quality,It would be bright and smooth 2.Output shaft starting moment: ≤0.45N.m(Different depending on belt and pulley replacement)

3.Impact force resistant experiment: It would not have cracks after the impact test 4.Noise test: The noise would be less than or equal to 50≤dB.



Gear Box Reducer,Speed Reducer Gearbox,Motor Reducer Gearbox,Gear Reducer Gearbox

Ningbo Sunlee Electrical Technology Co. , Ltd. , https://www.sunleeelectric.com