· A new batch of mid-axle car models will be selected for fuel fuel announcement Dongfeng Commercial Vehicle 8 models
Following the release of the first batch of mid-shaft models that passed the fuel announcement on January 23 this year, a number of mid-shaft models have recently entered the fuel announcement. On March 20th, the Ministry of Communications publicized the table of fuel consumption for road transport vehicles (the 38th batch). Among the 18 vehicle transport models selected in the batch, 8 models were from Dongfeng Commercial Vehicle Co., Ltd., and Dongfeng Commercial Vehicle Co., Ltd. also became the largest chassis supplier among the selected vehicles.
Application:
Matting Agent with other ingredients, and then extrude them together.The dosage of matting agent is 5~8% of resins, suitable for matt finishes with 30~60% gloss (60°).The gloss level is also interrelated to the resins chosen.It is not recommend to use matting agent for black or other dark color finishes.
Our Advantage & Service:
Powder Coating Mattging Hardener,Powder Coating Outdoor Matting Agent,Powder Coating Indoor Matting Agent,Powder Coating Chemical Matting Agent Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com
The 18 vehicle transport models selected by the batch were Dongfeng Commercial Vehicle Co., Ltd., SAIC Iveco Hongyan Commercial Vehicle Co., Ltd., CIMC Vehicles (Group) Co., Ltd., Yangzhou CIMC Tonghua Special Vehicle Co., Ltd., Tianjin Raul Industrial Co., Ltd. Co., Ltd. manufactures. Among them, the largest proportion of chassis supply brands is Dongfeng commercial vehicles, a total of 8 models, followed by China FAW and SAIC Hongyan, respectively, 4 models, China National Heavy Duty Truck has 2 vehicles into the fuel announcement for publicity. In terms of driving form, there are 12 models for 6×2 models and 6 models for 4×2 models.
Among the eight Dongfeng commercial vehicle mid-axle models that entered the announcement, two were 4×2 transport models and six were 6×2 transport models. Among them, two 4×2 transportation models are produced by Dongfeng Commercial Vehicle and Tianjin Raul Industrial Co., Ltd. The two models match the engine model DDi75S350-50, the transmission model is 9JS135T-B, and the final drive ratio (drive axle) The speed ratio is 4.100 and the tire size is 315/70R22.5.
Among the six 6×2 transport models, two are produced by Dongfeng Commercial Vehicle, and the other four are produced by Dongfeng Commercial Vehicle and CIMC Vehicle (Group) Co., Ltd. The two mid-axle cars produced by Dongfeng Commercial Vehicles are matched with the ISD285 50 engine produced by Dongfeng Cummins Engine Co., Ltd., the transmission model is 9JS119TA, the final speed ratio is 4.100, and the tire specification model is 275/70R22.5. . The two vehicle transport vehicles (trains and tractors) of the ZJV5190TCL model produced in cooperation with CIMC are matched with the ISDe270 40 engine produced by Dongfeng Cummins Engine Co., Ltd., the transmission model is DF6S900, and the final speed ratio is 5.571. The tire specification model is 275/70R22.5. The vehicle model is ZJV5210TCL's two vehicle transport vehicles (train and tractor), the matching engine model is ISD300 50, the transmission model is 9JS119TA, the final reducer speed ratio is 4.100, and the tire specification model is 275/70R22.5.
-Technical Support Online Service Provided
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
-On-site Training Service Provided
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of powder coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage)
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.