Interim Measures for the Financial Award for New Energy Vehicle Industry Technology Innovation Project Launched
Water-assisted injection molding: Water-assisted injection molding technology is an advanced injection molding process in which part of the melt is injected into the mold cavity and high-pressure water is injected into the melt through the equipment to finally shape the workpiece.
Due to the incompressibility of water, the water front creates a solid interface, squeezing the inner wall of the product into a cavity, and the water front also acts as a rapid cooling. Therefore, the water supplement has many advantages over the gas supplement. Research and application show that the water supplement can produce thinner and more uniform cavity wall, and the inner surface of the flow channel is very smooth. Especially for thick wall workpiece, the cooling time can be greatly reduced compared with gas auxiliary.
Plastic Parts,Electronic Plastic Parts,Circuit Board Plastic Parts,Injection Molded Plastic Parts Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com
In order to implement the "Circular of the State Council on Printing and Distributing Energy-saving and New-Energy Auto Industry Development Plan (2012-2020)" (Guo Fa [2012] No. 22), to further enhance the technological innovation capability of the new energy automotive industry and accelerate the industrialization process, With the approval of the State Council, the Ministry of Finance, the Ministry of Industry and Information Technology, and the Ministry of Science and Technology will organize the implementation of technological innovation projects for the new energy automotive industry.
On October 15, the Ministry of Industry and Information Technology published on the official website the Notice on Organizing and Implementing Technological Innovation Projects for the New Energy Vehicle Industry, and formulated the Interim Measures for the Management of Financial Incentive Funds for Technological Innovation in New Energy Vehicle Industry, followed by Followed up and released the specific conditions for project declaration.
The financial incentive funds will be allocated by the central government from the special energy-saving and emission reduction funds, and will focus on supporting newly designed and developed new energy vehicles and key components such as power batteries.
In the past two years, vehicle companies applying for incentive funds accounted for no less than 3% of their main business revenues for R&D investment. They have the ability to integrate vehicle design and continuous development of new energy vehicles, and have established key components and parts that are suitable for the implementation of this project. System and after-sales service system.
The entire vehicle project is led by the vehicle company, and joint battery, motor and other spare parts enterprises and related R&D units jointly declare that there are no more than two supporting companies for batteries and motor parts. Encourage the joint research of production, education and research.
Power battery and drive motor must pass ISO9001 and ISO/TS 16949 quality system certification, and the investment in R&D and industrialization of power battery technology should not be less than RMB 500 million, and the annual battery cell production capacity should not be less than 100 million ampere-hours.
The power battery project is led by the battery company and jointly reported by related material companies and R&D units. No more than two positive and negative electrodes, separator materials, and production equipment companies.
High gloss injection molding: Highlights the basic process of injection molding is prior to injection molding, through the use of high temperature and high pressure steam will mould surface rapidly warming, the forming die cavity surface temperature of resin plastic glass transition temperature (Tg) above, then the plasticizing good plastic melt into the closed mold cavity, the injection stage, mold temperature by high temperature and high pressure steam remains the same, When the injection is finished, the air supply is stopped, and the water vapor in the pipe is blown clean by air pressure of the air pipe. After that, the cooling water is injected to make the mold temperature drop rapidly until the mold is cooled and the product is removed by opening the mold