Aluminum cutting machine maintenance tips
R&D of science and technology is the driving force for the continuous progress of society. The use of large-scale machinery has led to the continuous advancement of industrial civilization. As a part of the cutting machine industry, we always aim at innovation and serve our customers. Welcome everyone to discuss cooperation. Details:/ Plastic A Board,Board Plastic,Plastic Face Boards,Plastic Panel SUZHOU JH DISPLAY&EXHIBITION EQUIPMENT CO.,LTD , https://www.jh-snapframe.com
1, daily inspection of aluminum cutting machine oil cup whether there is no lubricating oil, our company uses 20# air pressure lubricating oil, should maintain seven full, avoid air pressure parts without lubricating oil and reduce the service life, check whether the pressure is maintained 6 -7kg of pressure can be used to operate, too much pressure or too small easy to damage the air pressure parts, the water filter of the machine has an automatic row of water features, if you can not automatically drain, please replace the water filter device, to avoid pipeline product Water, affect the work of the machine 2. When the power is not in use, the fuse switch needs to be kept closed to ensure the safety of the machine and personnel. 3. Before and after the lubrication, the support rod and the presser ring, the connecting rod frame The joints between the shaft, cylinder joint, and the in-feed and out-feed rollers must be inspected once a week. Lubrication should be performed at the right time to avoid the loss of the machine due to seizure. 4. Cutting oil: The fuel injection group can spray CPC-R32 or saponification oil. The air volume can be adjusted and the left and right oil amount can be controlled separately using aluminum cutting oil or water-soluble cutting oil (saponified oil) 1:20, the proportion can not be too thin, and the water is too heavy to cause rust or stuck. Daily inspection of the oil amount is needed. Is it enough Need to supplement insufficient, sufficient cooling can increase tool life, reduce the aluminum cut burr.
5. Keep the work surface clean to ensure the sawing accuracy. 6. Check whether the air duct is damaged daily. If it is damaged, replace it with a new one to prevent the machine from working due to water leakage. 7. Use the CPC-R68 for the oil drum. The hydraulic fluid must be maintained at seven full minutes to ensure smooth operation of the cylinder. When refueling, first turn off the gas source, close the back cover, open the oil cover above the oil drum, add the oil to seven full minutes, and close the oil cover. If you can cover it.
8. Periodically (preferably once a week) check the belt for excessive wear, parallelism, and if the belt surface pressure is too loose or too tight.
9. If there is any failure or inoperative condition of the pneumatic parts during operation, replace the defective air-pressure parts. 10. The fuel injection cooling system of the machine uses an injector and uses the siphon principle to suck the cooling oil to the nozzle and cool the saw blade. In order to avoid the obstruction of air-pressure parts and produce obstructions, China Cutter Trading Network is now giving feedback to new and old members. Specially introduced advertising space to experience activities for free, a golden opportunity, first appeared to be oh. Log on to the official website for the latest information:/
Editor: zgqgjjyw